Categories
Deck Coating Deck Water Proofing

The Dos And Don’ts Of Sealing A Deck

Are you aware of the proper process of sealing a deck? In order to make your deck look outstanding for the upcoming outdoor summer plans, read below for what you need to know.

Your deck is the best place to relax and enjoy the good weather during the summer. If you want to get the most out of it though, you need to take good care of it. There is so much information floating around about deck care though, you don’t even know where to start. Here are some dos and don’ts of sealing a deck, so you know where to get started.

Do Seal Your Deck At The Right Time

Timing is key when sealing your deck. You need to ensure you’re applying product in the right time frame, so you can get the most from it.

If you’re looking to seal a brand new deck, you’ll need to give it at least 30 days before you start sealing it. That’s because a brand new deck is still too wet, and will need some time to dry out. The best way to see if your deck is ready for sealing is to pour some water on it. If the water beads up, then your deck is still too wet. If it soaks it up though, it’s ready for sealing.

The time of day and weather will also dictate when you should seal your deck. You want a clear, dry day to seal it so the seal can get dry and cure. It’s best to apply it during the day too, as the sealant won’t evaporate in the hot afternoon sun.

Don’t Apply On Damp Or Frosty Decks

If your deck is damp or frosty, it won’t be able to properly take on the sealant you want to use. At best, you’ll end up with a blotchy-looking deck, and that’s not what you’re going for. At worst, you’ll see the sealant start to bead up instead of being absorbed, so the wood won’t get the protection it needs.

Do Pick The Right Sealant

This is where many homeowners slip up. There are so many different options, which one should you choose? This very much depends on what you’re looking for from your sealant. You can choose from any of the following:

Sealant: This is what will protect against moisture damage. They have waterproof or water repellent properties and are usually thicker than wood stains. They don’t have any pigmentation though, and won’t provide as much UV protection as other products on the market.

Stains: These will always have pigmentation in them, which will add color to your deck as well as adding UV protection. However, they only offer moderate protection against moisture.

Paint: There are several deck paints on the market, and they are usually oil or latex-based. Be aware that if there’s any moisture left in your deck, the paint can bubble or chip away. Paint will offer UV and moisture damage but doesn’t last as long as stain or sealant.

Many homeowners choose a combined stain and sealant, as this gives the wood color while protecting it. It’s up to you, so choose the option that works best for you and your deck.

Don’t Start Without Preparing Your Deck

You can’t head out as soon as you have your sealant and apply it right onto the deck. You need to prepare the wood first, so it’s ready for sealing.

First, inspect the deck. You’re looking for any problems with the wood, such as cracking, splitting, or pest damage. Termites are the most common pest issue with decks but don’t discount the fact that animals can nest under there, too. If you find any damage, have it repaired before you get started.

Next, wash the deck to remove any grime. A power washer is best to scrub the deck clean, ready for sealing. Finally, after 24 hours of drying, sand the wood to create the best sealing surface. Sand the entire surface, even if there are sections that are still sealed. Any previous sealant will stop the new sealant from penetrating the wood.

Finally, sweep the deck thoroughly to remove any dust and dirt. Once you’ve done that, you’re ready to begin.

Do Use The Right Tools

There are several tools you can use for your deck, to ensure that the sealant is applied in an even layer. You can choose between a paintbrush, a roller, or a paint sprayer, so pick the one that’s right for you. You can use a pole so you can apply from a standing position, or on your hands and knees; if you do that, knee pads are very much recommended.

Don’t Apply A Thick Layer

When applying sealant to the deck, the thickness of the application is important. You’ll usually only need one layer, and it needs to be fairly thick. This allows it to be absorbed by the wood and get full protection. Laying the sealant on too thick will result in peeling and chipping.

If you need to apply a second layer, it’s best to do so only after you’ve allowed the first layer to dry for at least 24 hours.

Do Leave Your Deck For 48 Hours

Now you’ve got a full layer of brand new sealant on your deck, you don’t want to disturb it. You want to stay off your deck for at least 48 hours, which gives it enough time to dry and fully protect your deck. You may need to block entrances from the house, to remind family members not to step on it. After 48 hours, the sealant should be fully dry.

Don’t Forget To Seal The Deck Every Year

This is a general rule, to ensure that you keep your deck in good condition. If you live in a sunnier area, you really need to seal your deck every year. If you live in colder climates, you can get away with resealing the deck once every two or three years.

Conclusion

Now you know exactly how you should go about sealing your deck. And if you ever need assistance, it’s ideal to call in the professionals. Take care of it, and it will be able to last for decades into the future.

Categories
Deck Coating

How Deck Coatings Add Style and Sensibility

If your deck is beginning to look like it needs repair or a replacement, then deck coatings may be the best option to save the day. Read the details below.

The warm, sunny weather that is prevalent in Ventura can take its toll on wooden decks and concrete patios. When sun damage occurs, wooden decks are especially vulnerable to wind and rain. Replacing the surface of a deck or patio can cost thousands of dollars. Because of the steep price, many homeowners opt for deck coatings to re-coat their deck instead of replacing it.

If your home or business has a wooden deck or porch, then an application of protective deck coating sealants is essential to maintain its materials. Wood surfaces will not last without high-quality sealants that repel moisture and prevent infestations of insects. The wood materials on your home or business’s porches will swell and warp due to the absorption of moisture from rain and dew, leading to an uneven walking surface.

Benefits of Deck Coatings

There are a variety of benefits to coating your deck, which include:

  • Changing the look, style, or color of a deck or patio.
  • Saves money versus replacing a deck or patio.
  • Surfaces can be coated with a waterproof material, reducing the risk of slips and falls.
  • Makes cleaning easier.
  • Protects the investment of a deck.

Sealing Wood Helps to Prevent Insect Infestations

You can request deck coatings for wooden surfaces that you have already stained or painted to prevent fading or peeling of the substances. A thick coating of protective liquid that dries and seals wood will prevent invasion by insects such as termites that consume cellulose fibers. The application of deck sealants is vital to avoid attracting termites that can also invade a building, leading to extensive structural problems.

Choose Sealants that Provide Ultraviolet Light Protection

For buildings in year-round sunny climates, an ultraviolet light liquid deck coating can protect wooden surfaces from the damages caused by dangerous rays. You can decide when to have new deck coating applied that depends on the amount of pedestrian traffic that wears away the original application or how weather conditions have affected the materials. A professional contractor can repair damaged surfaces by sanding the wood to repair unevenness.

Deck Coatings Can Protect Tile, Stone, and Concrete Materials

When a porch or deck does not have good drainage, a contractor can fix the problem to prevent water from pooling. A contractor can repair decks located on rooftops or balcony surfaces on multistory buildings. There are also specialized coatings available to protect tile or stone porch or deck surfaces and pathways. While applying urethane or acrylic coatings to exterior walkways, decks or porches, it is also possible to cover concrete surfaces such as driveways.

Process of Coating a Deck

After deciding on your deck coatings, the damaged wood or concrete will first need to be repaired. Repairing the deck or patio first will ensure that the coating will go on smoothly and will prevent the deck or patio from becoming ruined.

After fixing the area, the deck will be sanded until it is smooth and ready to receive the coating. The entire area is then be swept to remove any remaining debris or sawdust. The coating will then be applied to the area and allowed to dry.

Variety of Colors, Styles, and Finishes

Many people with a cement patio or deck feel frustrated at its lack of aesthetic appeal. Deck coatings come in a variety of colors to fit the theme of any home. Additionally, there are a variety of styles and finishes that can mimic the look of tile, flagstone, or sand. The result is a deck or patio that looks modern and beautiful.

Again, waterproof finishes can also be applied that reduce slips and falls. This is especially important if children play in the water during the summer days on the deck or for seniors who may slip when coming inside from the rain.

Conclusion

If your deck is beginning to look worn or no longer fits in your style, applying a coating can save you money while helping you to get the look that you’ve always wanted.

Categories
Deck Water Proofing

The Value Of Having An Advanced Waterproofing Deck System

It’s a good time to learn about a waterproofing deck system, especially if you’re already seeing continuous rain fall upon your outdoor deck. Below is how to best care for it.

The rainy season is coming up, and that means a lot of things for your home. You’ll need to ensure you’re protecting your roof by cleaning out gutters and fixing holes, so it won’t develop leaks. You’ll also need to prepare your yard, so all your plants will withstand the extra water. But, what about your deck? A lot of rain can damage the wood, and that’s the last thing you want.

Here’s how to protect your investment and keep your deck in the best possible condition.

How Rainfall Damages Your Decking

If you don’t have any waterproofing on your deck, then water will be able to get into the wood. This causes several problems that can be potentially costly to fix.

The biggest problem is that you may not even see the damage happening. It will rain, the water will pool for a few hours, and then disappear. You think the water has evaporated, but in fact, it will have soaked into the unfinished wood. If this keeps repeating, then that water will start to cause problems.

Firstly, water can lead to the wood of your deck splitting. When there’s water on your deck, that’s going to attract other things, like dirt. This then makes its way into the decking, creating more problems for you. Over time, that water and dirt will get in through the cracks in your deck, even the tiny ones you can’t see. The dirt will expand in the cracks, pushing them wider. This also happens if the water freezes, something you need to think about with winter coming up. If that keeps happening, then the wood will soon split.

Then, there’s the fact that water soaked wood is a haven for pests like termites. They’ll happily eat into the wood to get at the dry wood beneath, as they’re attracted to the bacteria that sits in wet wood. If this is allowed to continue, then the deck will lose stability and become unsafe.

You have to consider mildew and mold too. When water gets into the wood and can’t escape, it creates the perfect breeding ground for it to grow. Of course, mold is ugly, but it’s also a safety hazard. It’s a known allergen, and it again will make your deck unstable as it continues to grow.

The Importance of Maintaining Your Deck

As you can see, it’s so important to maintain your deck and keep it as dry as possible. Untreated wood isn’t able to resist water, so you need to find ways to keep it out.

If water is allowed to collect in the wood, then the deck will become less stable over time. Again, remember that from the outside, it may look as though nothing is wrong. Inside though, the wood will be rotted or cracked, ready to break. That wood may break just as you walk out onto it, putting you at risk.

At this time of year, it’s important that you take special care of your decking. With the colder weather, you won’t be out on your deck as much. Problems can start to arise that you won’t even see until it’s too late. If you’re paying attention though, you can stop those problems in their tracks.

Avoiding Water Damage 

The best way to avoid water damage to your deck is to invest in a waterproofing deck system. Waterproofing your deck protects it by adding a waterproof layer that water can’t get into. If water can’t soak into the wood, then it can’t attract pests, swell in the cracks, or allow mold to grow. It’s a simple solution, but will be the best thing to do this winter.

If you want to to do this, you can hire professionals to handle it for you, or you can waterproof it yourself. Either option will allow you to keep your deck looking like new.

How to Waterproof a Deck 

If you’re going the DIY route, you’ll need to ensure you’re doing the job properly. Any missed parts will still leave your deck vulnerable to water, so here’s how you can properly waterproof the wood.

Step one: You need to clear the area before you can start work. Sweep away any debris on the deck, to make a clear surface. Move any objects you keep on the deck, such as grills and furniture. Once everything is moved, take a look for any loose boards or nails. These will need to be repaired before you can move forward.

Step two: Now that everything has been cleared, the wood needs to be cleaned. Scrubbing the deck with a stiff brush and water will be enough to do the job here. Rinse the wood with clean water afterwards, and let it air dry. Remember, water will find its way into the wood, so let it air dry for around two days before you continue.

Step three: Now you’re ready to start applying sealer. Choose a time when you’re going to get several clear days, to ensure rain won’t cause you any problems. Pick the right waterproof sealer for your deck, and then stir it with a paint stirrer. The best way to apply this product is with a lint free nap roller, the same way you would apply paint. Work with two or three boards at a time, applying sealer before moving on to another section. Do this in thin layers, to ensure you get the best coverage.

Step four: Start adding another coat while the first is still wet, working in the same sections as you did before. You can also use a lamb’s wool pad to distribute the sealer more evenly, giving you a smoother look. Finish off by using a paint brush to seal areas like railings and corners. Allow the sealer to totally dry before you place anything back on the deck.

Conclusion

Once you’ve done this, your deck will be ready for the winter, and as much rain as the weather can throw at it. A waterproofing deck system will keep you safe, keep mold and pests out, and keep your deck looking its best.

Categories
Deck Coating

Urethane vs Acrylic: Your Deck Coating Resource

Maintaining a healthy deck should be just as important as maintaining the rest of your home. So when it comes to deck coatings, which one is best for your deck needs? Here’s a look at urethane vs acrylic.

Your deck is a place for entertaining and relaxing, but it’s also an investment. To start, you’ll need to pay the initial fees of having it designed and installed. From there you’ll want to spend some extra funds on keeping it maintained. One way to protect it from the usual wear and tear involves applying a protective coat or finish.

Specifically, a deck coat will safeguard against scratches, sun damage, and rotting. As you might imagine, a rotted or scratched deck can cost a lot to repair. Your best course of action is to simply apply a protective coat beforehand.

You may want to protect a brand new deck or something that’s already seen some wear. Either way, you have a variety of materials to choose from. In most cases, a professional will recommend either an urethane or acrylic blend.

So, how do you decide between urethane vs acrylic?

Deck Coating Layers

Having a deck is one of the great joys of home ownership and can facilitate the enjoyment of your space during warmer months. Just like other spaces in your home, your deck needs regular maintenance in order to prolong its lifespan and protect its condition. Outdoor deck coatings, whether urethane or acrylic, keeps your deck safe from scratches, sun damage, and moisture.

If your area is made of wood, you can forestall rotting, the material becoming brittle and falling apart. Repairing a damaged deck, or rebuilding one altogether, is very costly. Properly installed and maintained deck coatings can safeguard against this expense.

Your outdoor deck coatings will have several layers, with the top ones providing the waterproofing as well as protecting the lower sections. Usage abrasion, such as rips, holes, and/or burns, as well as constant exposure to the elements, will contribute to the maintenance needs of your deck. If you keep your area properly maintained, you will be swapping out the disappearing top layers as needed (approximately every few years), and your lower layers could potentially last a lifetime.

Urethane vs Acrylic Outdoor Deck Coatings

These two types of material coatings are among the most popular choices for property owners. The choice of one versus the other will vary depending on your unique needs, with one of the main differences being that urethane can withstand water exposure because it is solvent-based.

Acrylic coatings are water based, by contrast, so the material may break down if comes into contact with rain or water (especially important to avoid before the layer has dried). They are, however, cheaper than urethane coatings, so they are popular in places with warmer climates. Other selling points include being easy to clean and minimal odor and toxin emissions.

Urethane benefits include a longer lifespan in general and a superior toughness overall.

Choosing the right outdoor deck coatings, as well as keeping your outdoor sphere updated regularly, can be guided with the help of a professional. Making this a priority ensures you can delight in your deck for years to come.

Urethane Coatings: Pros and Cons

Urethane coatings have a few of the same advantages associated with their acrylic counterparts. For example, the material also looks glossy and emits fewer odors. That being said, this product is generally solvent-based.

This results in some different features, such as:

  • Strong resistance to traffic.
  • Toughness, flexibility, and less risk of chipping over time.
  • Less vulnerability to spotting and discoloration.
  • Ability to level out well-making it a great product for metal.
  • Ability to adhere to previous finishes.
  • No susceptibility to water damage.

As with any product, there are a few disadvantages to keep in mind.

For example, urethane coatings may:

  • Pose fire hazards.
  • Trap water during application-creating cracking or bubbling.
  • Cost more.
  • Have a plastic-like appearance, which doesn’t always look great on wood applications.

Of course, the market has a variety of urethane products to choose from. Depending on the blend, you may lose or gain some of these disadvantages. Your best course of action is to consult with a professional as you seek a material.

Acrylic Coatings: Pros and Cons

Acrylic coats are water based and among the most popular materials on the market.

A few of this coat’s advantages include:

  • Fewer odor and toxin emissions.
  • Lower price tag.
  • Easy to clean (with soap and water).
  • Good color retention.
  • Shiny and polished; great for concrete.
  • Resistant to UV damage.

Because this material is water based, applying the coating can prove tricky. If rain or water touches the deck before the coat has dried, the material may run.

Other disadvantages include:

  • Inability to hold up well in cold weather.
  • Poor bonding; shorter life span.
  • Softer finish.
  • Higher susceptibility to marks from shoes.

Because we live in a warmer climate, the disadvantages of acrylic coatings are pretty minimal. In fact, this material reigns as one of the most popular in the area.

Choosing a Product and Preparing for Application

A variety of factors will impact your ultimate decision.

You’ll need to ask yourself the following questions:

  • Am I in search of a natural-looking finish?
  • Is my deck covered?
  • What’s my deck made out of: concrete, lumber, or vinyl?
  • Is the deck low to the ground?
  • Has the surface been previously coated?

A professional can answer your questions and provide needed information. Once you decided on a product, you’ll want to prepare your deck for application.

Generally speaking, you’ll need to do the following:

  • Purchase enough of the material for two or more coats.
  • Consider refinishing the deck and repairing any damages.
  • Sand down the surface of the deck to allow for greater adherence.

Because we live in a sunnier climate, applying more than one coat is almost always a necessity. Your decking consultant can evaluate the surface of your deck. From there, he or she will determine exactly how many coats your deck needs.

Categories
Blog Deck

5 Wood Deck Maintenance Tips For Summer

The summer is the best time to be out on your deck. Place some lounge chairs out there, along with maybe a table and a cold drink, and you’re all set. To properly enjoy the sunshine though, you’ve got to ensure your deck is in peak condition. Here are some wood deck maintenance tips to help you get your deck ready for the summer season.

The Importance Of Wood Deck Maintenance

Like most things in your home, your decking needs to be taken care of. This is especially true as it’s outdoors, exposed to the elements. It takes a battering over the winter, and so in the summer it’s going to look a little sorry for itself.

Luckily though, it’s fairly simple to spruce it up and get it ready for the summer, when you’ll be using it most. Use these tips to clean it up and get it looking and performing at its best. 

 

1. Inspect Your Decking

Before you can do anything else to your decking, you need to thoroughly inspect it. You’re looking for any signs of wood rot, as they need to be addressed first before the rot spreads. If the deck has been well maintained, this shouldn’t be a problem. When inspecting your deck, don’t forget to check underneath it too. Wood rot can take hold in areas that aren’t easily seen, so ensure that you check everywhere. 

If you do find some signs of wood rot, you’ll need to replace that wood before it goes any further. It may mean taking out some planks and replacing them, or cutting out areas of wood underneath the deck. Measure the area to get the right size wood to replace it, and then have the new wood installed. 

 

2. Wash Your Deck

Over the colder months, dirt and other debris can start to build up on your deck. Now that the sun has come out, you can start to clean it off to make it look its best. To start, you’ll need to give the decking a good sweep, to get rid of any loose dirt. Use a putty knife to go in between the boards and ensure that nothing has been missed.

The best way to clean your deck is with a pressure washer. This helps blast the dirt off, and lets you get in between the cracks too. If there are any tough stains, you can treat them with chemical cleaners, but you’ll need to be careful to choose the right one for your deck. If you’re not sure how to do this, you can call in professionals to help.

Once the deck has been cleaned, allow it to dry out thoroughly before you start on the next step. 

3. Replace Loose And Popped Nails

Loose and popped nails are annoying, as they’re able to snag feet as you walk over them. Also if they’re loose, they’re not holding the wood down securely. If you’re seeing these problems with your deck, you’ll need to replace those nails. Many choose to simply hammer them back down, but that’s not enough to properly mend them. A hammered down nail will simply pop back up at a later date, so it’s much better to replace them.

When you do this, ensure you’re using a nail the same size as the one you’re replacing. Hammer it in close to the original hole to replace it, and then place a deck screw over the top of it. This is designed to hold the nail in place and stop it popping back up again. If you want, you can cement it down with putty to make it extra secure. 

 

4. Sand And Seal Your Deck

Now you’ve taken care of all the hard work, your deck is ready to be sealed. There are several types of sealant, so you’ll need to find the one that works best for you. For example, clear sealants will be able to keep the wood sealed, while still showing off the wood beneath. Semi transparent sealants will do something similar, but they’ll add a touch of color to the deck. It will still show off the grain, but it will also sink into the wood, protecting it. 

The last option is a solid sealant. These are a good option if there are marks on your deck that you want to cover, as the color will block out the look of the wood entirely. These sealants also allow you to bring a pop of color to your yard if you’re looking for something different. 

Whichever one you choose, now’s the time to pick one and seal your deck, ready for the summer. 

 

5. Routine Wood Deck Maintenance is Key

Now that your deck has been fully cleaned up and sealed, you’ll need to do routine wood deck maintenance on it. The good news is because you’ve done the hard work, you won’t need to do so much hard work when you’re keeping up with it. 

You’ll need to sweep the deck regularly, to remove any debris that falls on it. Debris will stain the deck if left there for long enough, so ensure that you’re removing it regularly to avoid this. You’ll also need to keep inspecting the deck, looking for any signs of damage, such as wood rot or loose nails. Replace wood and nails as and when needed, and you’ll stop damage from spreading.

As you work on the rest of the garden, you’ll need to consider your deck too. For example, if you’re spraying chemicals on your lawn, they may damage your deck if it comes into contact with it. Check the packaging of any chemicals you use, and ensure that they don’t touch your decking.  

Conclusion

With these wood deck maintenance tips, you’ll be able to get your deck looking amazing for the summer. It doesn’t take much work to get even the most tired looking deck looking like new again, so now is the time to get started. Take good care of it now, and you’ll be ready to use it all summer long.

Categories
Deck

5 Reasons You Should Waterproof Plywood Decks

Decks are the perfect spot to relax in the summer time. To maintain them, you must waterproof plywood decks, especially in the hot California climate.

Having a plywood deck on your home brings so many benefits to you as a homeowner. When they’re well cared for, they last for years, look great, and give you extra living space you can use whenever the sun is out.

To keep it looking good though, you’ve got to waterproof it. Here’s 5 reasons why you need to waterproof plywood decks.

 

1. Moisture Is A Constant Concern

The biggest reason you need to waterproof your decking is because moisture is the enemy of plywood. When water gets into wood, it will allow it to start rotting and develop mold. These are the two fastest ways your deck will fall into disrepair.

If the deck is left long enough with water damage, it can start to fall apart and become dangerous to use.

It’s easy for water damage to happen without you even knowing about it. You can inspect your decking regularly, and it’s highly recommended that you do, but waterproofing it will ensure that your deck is protected from any damage that could occur.

 

2. It Saves You Money

When there is damage to your decking, you’ll need to get it repaired as soon as possible. If the damage is extensive, you’re going to find it’s expensive to repair it all. In most cases, those sections of wood will need to be taken out and replaced.

If the damage it bad enough, you’ll be faced with the cost of tearing the whole deck down and rebuilding it.

It’s expensive to do this, which is why you need to be waterproofing it. When you waterproof your deck, you’ll see that the damage it sustains is minimal at best.

Pair that with regular inspections, and you’ll be able to catch problems before they become expensive.

 

3. It Keeps Your Decking Safe

As mentioned earlier, if rot or mold sets in, it can lead to the decking breaking away or even crumbling, depending on the damage it’s sustained.

If this is happening, then you’ll see that the deck is dangerous to use. This is especially true if you have children. You don’t want to let children play on your deck if there’s a chance it’s beginning to rot.

That’s why it’s so important to waterproof it. You want to be able to use your deck safely, and know that it will hold steady under you when you’re enjoying it.

When you waterproof plywood decks, it stops that rot and mold from happening, so you won’t have to worry about it.

 

 

4. It Helps Keeps The Pests Out

Pests are the bane of every homeowner’s existence. No matter how careful you are, eventually you’ll need to evict something that’s trying to take up residence in your home.

Your decking is no different. If it’s allowed to take on damage, it gives pests the perfect route in. Termites are the most common pest in decking, as the feed off the wood, weakening it and damaging it even further.

If you want to avoid having to bring in pest control, you’ll need to waterproof that deck. It’ll stop the damage from happening, so the pests won’t have a route into it.

It keeps the deck safe, and you’ll save money on bringing in experts to get rid of them.

 

5. Keep Your Deck Looking Beautiful

You want your plywood decking to look as good as the day it was installed. You can do that if you take good care of it. That includes waterproofing it. When you waterproof plywood decks, you increase the curb appeal of your home, making it look fantastic.

You may not be thinking of selling now, but if or when you do come to sell, it’s one less thing to worry about.

Waterproofing is a fairly simple job, and once it’s done it will keep water out of the wood for months to come. If you keep up with this, you’ll have a deck that looks fantastic and in pristine condition.

 

Types of Waterproof Plywood Decks

Now that you know why you should waterproof your deck, you’ll need to find out how to do it. There any companies out there that will take on the job for you, and in many cases this is the best thing to do.

Look for recommendations from friends and family, or read reviews online to find the best company for you.

But how will they waterproof your decking? Essentially, they will coat your deck in a substance that will repel water and look good at the same time.

There are several different coatings that they can use, including:

1. Clear Stains:

As the name suggests, these sealants allow the grain of your deck to show through. They will still be waterproof and include wood preservatives.

Some include oils that sustain the wood further, so do your research if this is the style of sealant you want.

2. Semi Transparent Stains:

These sealants are tinted so they will add color to your deck, but you’ll still be able to see the wood underneath. They also offer stronger protection, and are less likely to peel off.

However, the color can fade and so it will need reapplying in time.

3. Solid Stains:

These sealants are opaque, and rather than seeping into the wood they sit on top, like paint. They’re great if you’re looking to hide discoloration and want to create a uniform look to your decking.

If you apply your sealant yourself, it’s important to remember that you need to cover every part of the deck with it.

There needs to be a full barrier against water, so any chinks in the armor will let the water in. Cover every surface with it, and it will be protected against moisture, rot and mold.

 

Conclusion

These are the 5 most important reasons why you should waterproof your plywood decking. You’ll keep it from rotting, save money, improve the look of your home, and keep it safe to use.

Call a decking company to get it sealed away from water and keep it looking great.

 

Categories
Deck

Follow These 3 Steps for the Best Deck Coating In Summer

The countdown to summer is on. As the weather continues to become milder and warmer, you can finally start brushing off your patio furniture and get ready for meals on the porch and evenings sipping cocktails on your deck. Better yet – take advantage of the longer evenings and warm air by inviting your friends and family over for a cookout or picnic. As the weather improves, family begins to utilize outdoor living spaces and loving life on the deck or patio.

But what if your wood deck doesn’t seem quite ready for your idyllic summer? If your deck is weathered, splintering, or discolored after  a harsh winter, it is time for you to consider getting ready for the best deck coating project possible.  Read on for some tips and tricks to breathe new life into a wood deck that might not be quite ready to tackle summer.

First: Repair the deck for the best deck coating possible

In order to get the best deck coating possible, you need to make sure that your deck is in good order. This means making any repairs necessary to make sure your deck is both functional and safe.

Begin by carefully inspecting the deck, especially the posts and structural elements that are close to or touching the ground, as these areas may weather more quickly than others. Check to make sure none of the wood is rotting or unstable, which may indicate a need for a more major renovation. If the deck seems structurally sound, look for cosmetic repairs: nailing down any nails that have popped out, or scraping away wood that may be chipped or flaking its old coat of paint or stain. It may be possible that boards could warp or twist, in which case you should consider simply replacing the damaged boards and then staining them to match.

Step 2: Clean the deck

Once you’re sure the deck is safe and sound, it’s time to clean the deck.  A clean deck will hold the stain, paint, or coating better than a dirty, crusty one. And even if you’re not planning on recoating your deck one particular season, a good deck will last longer with an annual cleaning.

There are many different types of deck cleaners – some that are mixed in a bucket, and some that can be hooked up to your hose – that you can apply manually and then scrub into the wood with a stiff-bristled brush. It takes some elbow grease, but will be worth it in the long run. If you don’t want to spend money on a commercial deck cleaner, you can combine bleach with soap and warm water and work that into the wood for an equally effective cleaning.

Step 3: Recoat the deck (stain, paint, acrylic coating)

Give your deck 24 hours in the sun to dry in order to best prepare it to be recoated. Recoating the deck will protect it from the elements of the coming summer (and then fall and winter!) season. When you are ready to recoat your deck, you can choose between stain, paint, and acrylic coating to beautify your outdoor living space.

Using Stain

Wood stain is great for adding rich, saturated, but still natural color that allows the wood grain of your deck to shine through. Wood stains are absorbed into the top layer of the wood, so they don’t form a seal on top of the wood deck, though they do fortify the wood and protect it from warping and weathering. In order to best protect your deck, a final coat of varnish is recommended.

The application process is simple: use a stain pad to apply a thin layer of stain to the wood.  Allow a full 24 hours for the stain to dry before applying a second coat or replacing your furniture on the surface of the deck.

Using Paint

If you choose paint over stain, you need to spend extra time preparing your surface to make sure the paint takes properly.

Because paint sits on top of the wood instead of being absorbed into it, it hides imperfections better; this also means, however, that any obstructions on the surface of the wood will prevent the paint from properly sticking. Make sure you purchase specified deck paint, as it is designed to withstand foot traffic and the outdoor elements.

Once you have swept, scrubbed, and smoothed your deck surface, it’s easy to apply paint. You can use either a roller or a traditional paint brush to apply a smooth, even layer of paint to each wood plank. Allow it to fully dry before adding a second coat or replacing your deck furniture.  Keep in mind that oil-based paints dry more slowly than acrylic ones.

Using Acrylic Coating

Another way to restore your wooden deck is to use a deck coating product to fill in cracks, add beautiful color, and restore tired wood. Coatings can smooth out your rough wood deck and are resistant to UV rays. This means that they can last much longer than traditional stains or paints.  Additionally, coatings can fill in and repair cracks and holes up to one quarter of an inch deep.

Some consumers may complain that deck coatings are hot to walk on and too fully cover nails and screws (making minor repairs sometimes more difficult), but these drawbacks are minor compared to the advantages that deck coatings boast. With these steps for the best deck coating, you are more fully protecting the wood, and – in the long run – you are saving yourself time and money because your deck will need to be touched up far less frequently.

You can apply deck coatings in much the same way as you apply paint, though please be sure to carefully read each manufacturer’s instructions. Of course, you can always hire an expert to refurbish your deck for the summer as well.

Get your deck in ship shape for summer by giving it new life with the best deck coating possible. Look it over for minor (and major) repairs, give it a good deep clean, and then brighten it up with these tips for the best deck coating, be it stain, paint, or an acrylic deck coating. Then you’ll be able to sit back, kick up your feet, and enjoy that summer sunshine in your outdoor living area!

 

Categories
Deck

How to Maintain a Deck and Prevent Wood Damage

Cleaning a wood deck can be a daunting task, but the process can be easy and simple with the appropriate equipment. A pressure washer can help relieve some of the fear and strain that is typically associated with cleaning an outdoor wooded surface.

Categories
Deck Coating Deck Water Proofing Maintenance Tips

Deck Maintenance Tips: 3 Ways to Keep Your Deck in Top Shape

An outdoor deck is a wonderful place to enjoy peace and quiet or to have outdoor gatherings with family and friends. If you live in a warm, mild climate, such as Santa Barbara or Malibu, then an outdoor space is ideal for enjoying the lovely weather. Therefore, in order to enjoy the beautiful outdoor climate, it is imperative to perform regular maintenance on outdoor decks. Regular deck maintenance will protect your investment, prevent costly repairs and ensure that you receive countless years of usage out of your outdoor space. There are a number of actions that homeowners can take to ensure that their deck looks great. Read below for a few of the easiest ways to keep your deck in top shape.

Categories
Deck Deck Coating

Top Acrylic Deck Coatings for Homeowners in Santa Barbara, California

As summer quickly approaches, many homeowners in Santa Barbara, California are searching for a durable coating for their deck. Water-based 100 percent acrylic coatings are often a good choice as these products can create a flexible protective film that is resistant to the sun’s glaring rays. The three most popular types of deck coverage products are semi-transparent acrylic stains, solid color acrylic stains, and wood restoration acrylic coatings.