Deck Coating Deck Water Proofing

The Dos And Don’ts Of Sealing A Deck

Are you aware of the proper process of sealing a deck? In order to make your deck look outstanding for the upcoming outdoor summer plans, read below for what you need to know.

Your deck is the best place to relax and enjoy the good weather during the summer. If you want to get the most out of it though, you need to take good care of it. There is so much information floating around about deck care though, you don’t even know where to start. Here are some dos and don’ts of sealing a deck, so you know where to get started.

Do Seal Your Deck At The Right Time

Timing is key when sealing your deck. You need to ensure you’re applying product in the right time frame, so you can get the most from it.

If you’re looking to seal a brand new deck, you’ll need to give it at least 30 days before you start sealing it. That’s because a brand new deck is still too wet, and will need some time to dry out. The best way to see if your deck is ready for sealing is to pour some water on it. If the water beads up, then your deck is still too wet. If it soaks it up though, it’s ready for sealing.

The time of day and weather will also dictate when you should seal your deck. You want a clear, dry day to seal it so the seal can get dry and cure. It’s best to apply it during the day too, as the sealant won’t evaporate in the hot afternoon sun.

Don’t Apply On Damp Or Frosty Decks

If your deck is damp or frosty, it won’t be able to properly take on the sealant you want to use. At best, you’ll end up with a blotchy-looking deck, and that’s not what you’re going for. At worst, you’ll see the sealant start to bead up instead of being absorbed, so the wood won’t get the protection it needs.

Do Pick The Right Sealant

This is where many homeowners slip up. There are so many different options, which one should you choose? This very much depends on what you’re looking for from your sealant. You can choose from any of the following:

Sealant: This is what will protect against moisture damage. They have waterproof or water repellent properties and are usually thicker than wood stains. They don’t have any pigmentation though, and won’t provide as much UV protection as other products on the market.

Stains: These will always have pigmentation in them, which will add color to your deck as well as adding UV protection. However, they only offer moderate protection against moisture.

Paint: There are several deck paints on the market, and they are usually oil or latex-based. Be aware that if there’s any moisture left in your deck, the paint can bubble or chip away. Paint will offer UV and moisture damage but doesn’t last as long as stain or sealant.

Many homeowners choose a combined stain and sealant, as this gives the wood color while protecting it. It’s up to you, so choose the option that works best for you and your deck.

Don’t Start Without Preparing Your Deck

You can’t head out as soon as you have your sealant and apply it right onto the deck. You need to prepare the wood first, so it’s ready for sealing.

First, inspect the deck. You’re looking for any problems with the wood, such as cracking, splitting, or pest damage. Termites are the most common pest issue with decks but don’t discount the fact that animals can nest under there, too. If you find any damage, have it repaired before you get started.

Next, wash the deck to remove any grime. A power washer is best to scrub the deck clean, ready for sealing. Finally, after 24 hours of drying, sand the wood to create the best sealing surface. Sand the entire surface, even if there are sections that are still sealed. Any previous sealant will stop the new sealant from penetrating the wood.

Finally, sweep the deck thoroughly to remove any dust and dirt. Once you’ve done that, you’re ready to begin.

Do Use The Right Tools

There are several tools you can use for your deck, to ensure that the sealant is applied in an even layer. You can choose between a paintbrush, a roller, or a paint sprayer, so pick the one that’s right for you. You can use a pole so you can apply from a standing position, or on your hands and knees; if you do that, knee pads are very much recommended.

Don’t Apply A Thick Layer

When applying sealant to the deck, the thickness of the application is important. You’ll usually only need one layer, and it needs to be fairly thick. This allows it to be absorbed by the wood and get full protection. Laying the sealant on too thick will result in peeling and chipping.

If you need to apply a second layer, it’s best to do so only after you’ve allowed the first layer to dry for at least 24 hours.

Do Leave Your Deck For 48 Hours

Now you’ve got a full layer of brand new sealant on your deck, you don’t want to disturb it. You want to stay off your deck for at least 48 hours, which gives it enough time to dry and fully protect your deck. You may need to block entrances from the house, to remind family members not to step on it. After 48 hours, the sealant should be fully dry.

Don’t Forget To Seal The Deck Every Year

This is a general rule, to ensure that you keep your deck in good condition. If you live in a sunnier area, you really need to seal your deck every year. If you live in colder climates, you can get away with resealing the deck once every two or three years.


Now you know exactly how you should go about sealing your deck. And if you ever need assistance, it’s ideal to call in the professionals. Take care of it, and it will be able to last for decades into the future.

Deck Coating

How Deck Coatings Add Style and Sensibility

If your deck is beginning to look like it needs repair or a replacement, then deck coatings may be the best option to save the day. Read the details below.

The warm, sunny weather that is prevalent in Ventura can take its toll on wooden decks and concrete patios. When sun damage occurs, wooden decks are especially vulnerable to wind and rain. Replacing the surface of a deck or patio can cost thousands of dollars. Because of the steep price, many homeowners opt for deck coatings to re-coat their deck instead of replacing it.

If your home or business has a wooden deck or porch, then an application of protective deck coating sealants is essential to maintain its materials. Wood surfaces will not last without high-quality sealants that repel moisture and prevent infestations of insects. The wood materials on your home or business’s porches will swell and warp due to the absorption of moisture from rain and dew, leading to an uneven walking surface.

Benefits of Deck Coatings

There are a variety of benefits to coating your deck, which include:

  • Changing the look, style, or color of a deck or patio.
  • Saves money versus replacing a deck or patio.
  • Surfaces can be coated with a waterproof material, reducing the risk of slips and falls.
  • Makes cleaning easier.
  • Protects the investment of a deck.

Sealing Wood Helps to Prevent Insect Infestations

You can request deck coatings for wooden surfaces that you have already stained or painted to prevent fading or peeling of the substances. A thick coating of protective liquid that dries and seals wood will prevent invasion by insects such as termites that consume cellulose fibers. The application of deck sealants is vital to avoid attracting termites that can also invade a building, leading to extensive structural problems.

Choose Sealants that Provide Ultraviolet Light Protection

For buildings in year-round sunny climates, an ultraviolet light liquid deck coating can protect wooden surfaces from the damages caused by dangerous rays. You can decide when to have new deck coating applied that depends on the amount of pedestrian traffic that wears away the original application or how weather conditions have affected the materials. A professional contractor can repair damaged surfaces by sanding the wood to repair unevenness.

Deck Coatings Can Protect Tile, Stone, and Concrete Materials

When a porch or deck does not have good drainage, a contractor can fix the problem to prevent water from pooling. A contractor can repair decks located on rooftops or balcony surfaces on multistory buildings. There are also specialized coatings available to protect tile or stone porch or deck surfaces and pathways. While applying urethane or acrylic coatings to exterior walkways, decks or porches, it is also possible to cover concrete surfaces such as driveways.

Process of Coating a Deck

After deciding on your deck coatings, the damaged wood or concrete will first need to be repaired. Repairing the deck or patio first will ensure that the coating will go on smoothly and will prevent the deck or patio from becoming ruined.

After fixing the area, the deck will be sanded until it is smooth and ready to receive the coating. The entire area is then be swept to remove any remaining debris or sawdust. The coating will then be applied to the area and allowed to dry.

Variety of Colors, Styles, and Finishes

Many people with a cement patio or deck feel frustrated at its lack of aesthetic appeal. Deck coatings come in a variety of colors to fit the theme of any home. Additionally, there are a variety of styles and finishes that can mimic the look of tile, flagstone, or sand. The result is a deck or patio that looks modern and beautiful.

Again, waterproof finishes can also be applied that reduce slips and falls. This is especially important if children play in the water during the summer days on the deck or for seniors who may slip when coming inside from the rain.


If your deck is beginning to look worn or no longer fits in your style, applying a coating can save you money while helping you to get the look that you’ve always wanted.

Deck Coating

Urethane vs Acrylic: Your Deck Coating Resource

Maintaining a healthy deck should be just as important as maintaining the rest of your home. So when it comes to deck coatings, which one is best for your deck needs? Here’s a look at urethane vs acrylic.

Your deck is a place for entertaining and relaxing, but it’s also an investment. To start, you’ll need to pay the initial fees of having it designed and installed. From there you’ll want to spend some extra funds on keeping it maintained. One way to protect it from the usual wear and tear involves applying a protective coat or finish.

Specifically, a deck coat will safeguard against scratches, sun damage, and rotting. As you might imagine, a rotted or scratched deck can cost a lot to repair. Your best course of action is to simply apply a protective coat beforehand.

You may want to protect a brand new deck or something that’s already seen some wear. Either way, you have a variety of materials to choose from. In most cases, a professional will recommend either an urethane or acrylic blend.

So, how do you decide between urethane vs acrylic?

Deck Coating Layers

Having a deck is one of the great joys of home ownership and can facilitate the enjoyment of your space during warmer months. Just like other spaces in your home, your deck needs regular maintenance in order to prolong its lifespan and protect its condition. Outdoor deck coatings, whether urethane or acrylic, keeps your deck safe from scratches, sun damage, and moisture.

If your area is made of wood, you can forestall rotting, the material becoming brittle and falling apart. Repairing a damaged deck, or rebuilding one altogether, is very costly. Properly installed and maintained deck coatings can safeguard against this expense.

Your outdoor deck coatings will have several layers, with the top ones providing the waterproofing as well as protecting the lower sections. Usage abrasion, such as rips, holes, and/or burns, as well as constant exposure to the elements, will contribute to the maintenance needs of your deck. If you keep your area properly maintained, you will be swapping out the disappearing top layers as needed (approximately every few years), and your lower layers could potentially last a lifetime.

Urethane vs Acrylic Outdoor Deck Coatings

These two types of material coatings are among the most popular choices for property owners. The choice of one versus the other will vary depending on your unique needs, with one of the main differences being that urethane can withstand water exposure because it is solvent-based.

Acrylic coatings are water based, by contrast, so the material may break down if comes into contact with rain or water (especially important to avoid before the layer has dried). They are, however, cheaper than urethane coatings, so they are popular in places with warmer climates. Other selling points include being easy to clean and minimal odor and toxin emissions.

Urethane benefits include a longer lifespan in general and a superior toughness overall.

Choosing the right outdoor deck coatings, as well as keeping your outdoor sphere updated regularly, can be guided with the help of a professional. Making this a priority ensures you can delight in your deck for years to come.

Urethane Coatings: Pros and Cons

Urethane coatings have a few of the same advantages associated with their acrylic counterparts. For example, the material also looks glossy and emits fewer odors. That being said, this product is generally solvent-based.

This results in some different features, such as:

  • Strong resistance to traffic.
  • Toughness, flexibility, and less risk of chipping over time.
  • Less vulnerability to spotting and discoloration.
  • Ability to level out well-making it a great product for metal.
  • Ability to adhere to previous finishes.
  • No susceptibility to water damage.

As with any product, there are a few disadvantages to keep in mind.

For example, urethane coatings may:

  • Pose fire hazards.
  • Trap water during application-creating cracking or bubbling.
  • Cost more.
  • Have a plastic-like appearance, which doesn’t always look great on wood applications.

Of course, the market has a variety of urethane products to choose from. Depending on the blend, you may lose or gain some of these disadvantages. Your best course of action is to consult with a professional as you seek a material.

Acrylic Coatings: Pros and Cons

Acrylic coats are water based and among the most popular materials on the market.

A few of this coat’s advantages include:

  • Fewer odor and toxin emissions.
  • Lower price tag.
  • Easy to clean (with soap and water).
  • Good color retention.
  • Shiny and polished; great for concrete.
  • Resistant to UV damage.

Because this material is water based, applying the coating can prove tricky. If rain or water touches the deck before the coat has dried, the material may run.

Other disadvantages include:

  • Inability to hold up well in cold weather.
  • Poor bonding; shorter life span.
  • Softer finish.
  • Higher susceptibility to marks from shoes.

Because we live in a warmer climate, the disadvantages of acrylic coatings are pretty minimal. In fact, this material reigns as one of the most popular in the area.

Choosing a Product and Preparing for Application

A variety of factors will impact your ultimate decision.

You’ll need to ask yourself the following questions:

  • Am I in search of a natural-looking finish?
  • Is my deck covered?
  • What’s my deck made out of: concrete, lumber, or vinyl?
  • Is the deck low to the ground?
  • Has the surface been previously coated?

A professional can answer your questions and provide needed information. Once you decided on a product, you’ll want to prepare your deck for application.

Generally speaking, you’ll need to do the following:

  • Purchase enough of the material for two or more coats.
  • Consider refinishing the deck and repairing any damages.
  • Sand down the surface of the deck to allow for greater adherence.

Because we live in a sunnier climate, applying more than one coat is almost always a necessity. Your decking consultant can evaluate the surface of your deck. From there, he or she will determine exactly how many coats your deck needs.

Deck Coating

Wood Deck Resurfacing Ideas for the Perfect Spring Project

Your deck is the perfect place for you to relax and enjoy the sunshine after a long day, but what if your deck becomes cracked and full of splinters? Which type of wood deck resurfacing is best?

It’s an old argument, and it’s revisited every spring when homeowners realize that their decks have survived the winter—but just barely. It’s then that they are faced with a deck that needs a facelift and that recurring challenge: Do I paint or stain my wooden deck? What are the best wood deck resurfacing options for my deck?

Well, you can relax. There isn’t a right or wrong answer. Both products will give you what you want—a fresh look for your deck—and there are even other ways for you wake up that sleepy-looking structure before the summer entertaining season arrives.

Here are some ideas for wood deck resurfacing and coating; whether you have a new deck, or an old one. Most of them are do-it yourself ideas, although you may want to call in a professional if you’re not comfortable in that area.

Getting Bold with Paint

Painting your deck gives you the option of being creative with unique designs. Whether you’re coating a new surface or giving an old one a bold and refreshing update, exterior paint and some painters’ tape is all you need. Start by painting a single hue, and then try more bold patterns in a variety of colors. Just always make sure you’re using paints or stains made specifically for outdoor use. Here are five examples of creative designs:

    1. The outdoor rug: The best rugs for your deck are the kind that can be swept—with an ordinary broom. Simply tape off a rectangular design, then apply exterior paint in colors of your choice, and you’ll have a “rug” that can be hosed off.
    2. Abstract designs: If you have an artist’s touch, you can try freehand painting on your deck. Let your imagination be your guide.
    3. Geometric patterns: Designer Brian Patrick Flynn taped off large hexagons and used a palette of fuchsia, turquoise, and white to bring color to this outdoor space. Anyone can follow these step-by-step instructions.
    4. Stripes: You can use paint in many colors to create stripes. In this case, an entry deck was added to a kids’ playhouse and painted in alternating black and white stripes.
    5. Checkerboard pattern: You can make your wood deck resurfacing coordinate with the shutters or siding on your home’s exterior. That’s what the owners of this house did with their wooden porch boards in this checkerboard pattern.

Acrylic and Oil-based Stains: Which is Better?

If your deck looks worn out, you may need to replace it, but more than likely a new wood deck resurfacing coating will do the trick.  Here are two to consider:

Many homeowners prefer to use a semi-transparent stain with lightly pigmented coatings that can either change or maintain the color of your wood without hiding its grain. These water-repellant coatings contain ingredients that keep mildew in check. Semi-transparent coatings typically last about 18 months.

Solid-color stains have more pigment than semi-transparent products, so their color tends to hide the grain of the wood. But that added dye provides extra UV protection and better durability. So solid-color stains last longer—often three to five years.

Many homeowners who have used oil-based stains in the past have been switching to acrylics. Wood decks that have been tested at the Paint Quality Institute have shown that those treated with acrylic-based stains have to be recoated less often than their oil-based counterparts. They found that oil-based coatings quickly degraded, wore away, and often required a new application after one year.

Urethane Deck Coating 

A polyurethane coating sits on the surface of your deck rather than penetrating it. It is about fifty times thicker than paint, but it rolls on just the same. Proponents point out that it is a uniquely engineered urethane deck coating that is a long-lasting and reliable alternative to paints and stains and that it adheres to any properly prepared surface.

Opponents, however, warn that rain and harsh UV rays will cause polyurethane to fail quickly, which will subject the wood to weathering. If you do decide to use a urethane coating on your wood deck, you can better protect your deck from harsh weather conditions in summer and winter.

Wood Deck Resurfacing & Restoration Coating

Homeowners often choose wood restoration acrylic coatings for their severely weathered or neglected decks. They are made from an acrylic base material to which can include a tint along with UV inhibitors and solids (aluminum oxide or sand) to provide texture.

These deck coatings are very thick and can fill in and conceal cracks up to ¼-inch deep. They also create a slip-resistant finish that also resists future cracking and peeling. The prep work is extensive, and you’ll need a power washer, a bottle of deck cleaner, a roller, masking materials, and a roller extension.

While many homeowners are happy with the look of their deck after applying the restoration coating, others complain about the expense, the hard work, its roughness on bare feet, and its tendency to peel.

Installing a Composite Deck

You might think that it makes more sense to spend the money (and it takes quite a bit of it) on a composite deck and be maintenance-free forever. Composite decking ranges from $7 or so per square foot to double that and more depending on various factors.

Although these non-wood materials do not require the same amount of upkeep as wood decks, they are not totally without maintenance. They are susceptible to mold, scratches, fading, and warping, just like wood.

For quality and beauty, wood is hard to beat. It does require more upkeep than composite materials, but the outstanding results from regular sealing, staining, and cleaning make it a good choice for homeowners. Next time you are asking this question after wintertime, remember these wood deck resurfacing ideas!

Deck Coating

How To Protect Your Deck This Winter (And Why You Need To)

The winter weather is well and truly here, and that means you need to think about how you’re going to protect your deck.


It gave you a lot of enjoyment over the summer months, but now the weather’s turned colder you need to protect your deck. Here’s how to prepare your deck for winter, and why you need to.

Why Do You Need to Protect Your Deck in Winter?

Over the winter months, your deck is going to experience bad weather. It could be wet weather, high winds, or freezing temperatures. These will all work together to damage your deck, leading to sizeable deck repair work in the spring.

If you leave the deck to the elements during the winter, you’ll see that all kinds of damage can happen.

  • If water gets into the wood, then it will buckle or warp. That’s going to ruin the look of the deck, and necessitate you changing out boards in the spring.
  • Wet weather will also lead to mold and wood rot if you’re not paying attention. These can do untold damage to wood if left unchecked. In some cases, you’ll even see that the deck will suffer structural issues if you leave it for too long.

You don’t want to be spending money on repairs in the spring, just because you hadn’t prepared properly in the winter. Use these tips to properly prepare and protect your deck now, so you’ll maintain a beautiful deck once the warm weather returns.

Wash Your Deck Down

The first thing to do is to wash your deck down thoroughly. Remove any furniture or other items off it, and hose it down to remove any dirt that’s accumulated. Make sure you pay attention to any cracks or crevices, to ensure that everything is clean.

You’ll want to then scrub the deck with a specialist deck cleaning solution, available from hardware stores. This will ensure your deck is totally clean, ready to be protected over the winter.

Fill In Any Holes Or Cracks

Next, inspect your deck carefully. There may be cracks and holes that need to be filled. These should be done now, because they can easily get worse over the winter. Rain water pools in them and freezes, pushing them open and making them wider. Filling them now will save you a large job in the spring.

Again, you’ll find the appropriate wood filler in the hardware store. When the deck is clean and dry, apply the hole filler until the gaps are fully sealed. Let the filler dry and harden fully before moving onto the next step.

Coat Your Deck

If you’ve not coated your deck yet, now is the perfect time to do it. Coating the deck will seal the wood away from any moisture, so you won’t have to worry about mold or rot. It will also give it an excellent finish. When the summer comes, the best coats will even protect the wood from discoloration thanks to the sun’s UV rays.

There are multiple different kinds of coatings you can buy. These usually fall into the category of clear or opaque coatings. A clear stain is usually the best coating to use if you want the color of the wood to shine through. An opaque coating, on the other hand, will totally obscure the wood. If the wood is discolored or otherwise not attractive, that’s the option you may want to use.

If you’re not sure which one to use, or how to do it, you can talk to a painting company who will come and do the job for you. This is often a good idea, as a sealant needs to be covering every surface in order to work as it should. If there are any gaps, this will weaken your deck’s defense.

Cover Your Deck

Now the deck has been cleaned, filled and sealed, you’ll need to cover it up for the winter. Doing this will help you keep the deck clean and tidy over the colder months. Use a tarp to cover up as much of the deck as possible. Don’t worry if there are parts you can’t cover, such as railings, as this will be taken care of in the next step.

With a tarp on your deck, you’ll stop debris falling onto your deck and staining the wood. If any debris falls onto the tarp, it’s still a good idea to remove it as soon as possible. Debris such as dead leaves can lead to mold growth, which will cause problems. Having the tarp down means you’ll avoid this happening directly on the deck.

Brush Off Snow

Once the weather really start getting cold, you’ll see the snow start to fall. When this happens, you’ll need to brush the snow off your deck as soon as possible. If you have a tarp down you’ll have a little more time to get the job done, but you will need to remove the snow as soon as you can. This is fairly simple to do on any exposed parts, such as railings, as you can simply brush the snow off with a gloved hand.

The best way to do this is with an outdoor brush, so you can sweep away snow without damaging the boards. Using a metal shovel can chip at boards and damage them. Using chemicals is usually inadvisable for similar reasons. If you do need to melt the ice, use pet safe chemicals as they will be the least aggressive.

If you do need to use a shovel, be sure to shovel parallel to the boards, rather than across them. When shoveling across, it’s almost guaranteed that you’ll catch a board and chip it.


If you’re prepared for the winter, you will protect your deck and it will come out unscathed and look fantastic next summer. Clean it down, fill in any holes, and reseal the wood if you haven’t already.

Cover it up with a tarp, and remove any debris over the winter. When summer comes again, your deck will be ready.

Deck Coating

What Is The Best Deck Coating For Your California Home?

Your deck is susceptible to damage if not treated properly – especially in California; which is why finding the best deck coating for your home is essential.

Having a deck in your yard is one of the best ways to enjoy the outdoors. Place a patio table and chairs on it for breezy breakfasts, or add a Jacuzzi for relaxed evenings.

There’s all kinds of ways you can enjoy your deck. To keep that deck looking good, though, you’ve got to protect it with deck coating and waterproofing.

Here’s how to find the best deck coating to keep it looking great and in good condition for years to come.


Why Does Your Deck Need Coating?

A new deck looks great at first, but over time it will quickly develop problems.

Uncoated wood will begin to rot if it’s not protected from water and moisture. Wood rot repair is a serious problem that will be expensive to correct if you don’t spot it right away.

It’s also dangerous to you and your family. Rot will make the deck unstable, and could even collapse while you’re trying to use it.

That’s obviously the last thing you want to happen, so you’ve got to find ways to prevent it.

The Problem With Moisture

Also, you need to consider that your deck is a horizontal surface. In many cases, they don’t have good drainage systems.

When rainfall hits your deck, it won’t have anywhere to go. The water will simply sit there, and eventually seep through into the wood.

That’s when you get the problems that come with wood rot and mold.

You need to stop these problems before they occur. If you coat your deck as soon as you have it installed, you’re keeping it looking and performing as if it were brand new.



The Best Deck Coating Options For Your Deck

You’ve got a lot of choice when you’re looking for the best deck coating for your needs.

There’s different coatings that perform in different ways, so you’ve got to pick the one that’s best for you.

Here’s the different types you’ll find on the market:

1. Wood stain:

This is very commonly used on decking, and it’s clear why. It’s easy to apply, inexpensive, and looks good. If you want to go the DIY route, then this coating will sound like the best option to you.

Be aware though, that it’s not a perfect coating on its own. You need to add a good primer, and seal the stain well.

This will stop the stain from cracking when the wood expends or contracts, and stop water from getting into your deck.

2. Paint:

More homeowners are now looking at paint as a way to protect their decking. Modern flooring paints come in all kinds of colors, so you’ve got more choice than ever.

Paint’s also good at filling in small cracks and imperfections in the wood, so it’s a good choice if your focus is about the look of your deck.

Be aware though, paint is slippery when it’s wet, making it less safe for families. Also, you need to be very sure about the color before you apply it. Once the color is on, you’re going to find it very difficult to remove.

3. Polyurethane coatings:

If paint sounds good but you want a coating that’s harder wearing, then polyurethane coatings are the way forward.

They’re more commonly known for coating boats and garage floors, but they’re brilliant for decks that have a high amount of foot traffic.

They’re totally waterproof, so you don’t have to worry about water getting into the wood, and they’re resistant to UV light too. That’s perfect for Californians, as you don’t have to worry about the sun affecting your paint.

4. Acrylic coatings:

These are another common coating for decking. It’s popular as it’s cheaper than other methods, but still allows you to get a good finish on the deck.

You need to be aware that it’s a water based paint though, so this will affect how you apply it to your decking. If the wood gets wet before the paint has properly set, then it’s prone to running.

Also, acrylic coatings often don’t last as long as other coatings.


How To Apply Deck Coatings

The exact method you use to apply your coating will depend on which one you pick. Here are some good tips that will help you apply that coating well, to ensure that your deck is well covered and protected from the elements.

1. Wash down your deck:

No matter what coating you’re using, you need to be sure that the deck is as clean as it can be. If the deck isn’t cleaned, this will lead to imperfections in the coating, and possible entry points for moisture to get in and damage the wood.

Use a brush, bleach and water to scrub the deck down to get most of the dirt off.

Then, use a pressure washer to get every last inch of the wood before you clean it. Once you’ve done this, leave it for at least a day until it is totally dry.

2. Apply a primer:

You’ll next need to use a primer, in order to give your coating a good surface to stick to.

Use a natural bristle brush to apply this, as a foam brush won’t be able to stand up to the coating.

You’ll need to let this cure for at least three days, before you can move onto the next step.

3. Apply your coating:

Now, you can apply the coating that you’ve chosen for your deck.

Ensure that you’ll have a fun of dry days, so the coating will dry and cure properly, creating an impenetrable layer on the wood. Apply it with a roller with even strokes to let the color dry evenly.

Check the instructions to see how long it needs to dry, before you can use your decking.




It’s important to use the best deck coating for your home in order to protect your decking. With the right coating your deck will last for years to come, avoiding mold and rot.

Pick the coating that works for you, and apply it carefully to ensure you get the best from it.

All Climate offers deck coating, resurfacing, and waterproofing. Contact us today.

Deck Coating

8 Reasons You Need Elastomeric Deck Coating

With the changes in weather, especially in California, elastomeric deck coating is an essential part of your home maintenance.

Your deck is one of the most important areas of your home. It’s there for you to relax on when the weather is good, so you can enjoy the yard you’ve worked so hard on.

It’s the perfect place to read a book, eat dinner, or entertain your friends.

Whatever you use your deck for, you’ve got to take good care of it.

Here’s 8 reasons why elastomeric deck coating is what you need for your deck.


What Is Elastomeric Deck Coating?

This style of coating is designed to look a lot like paint, and will coat any surface to protect it from the elements.

Many home improvement companies use it as it looks good, provides excellent protection, and will last for a long time.

It can be used on multiple surfaces, most commonly on roofing and decking to create strong protective coatings.

Here are 8 benefits of this type of coating.


1. It’s 10 Times Thicker Than Paint

The great thing about elastomeric deck coatings is that they’re a lot thicker than regular paint.

While paint may flake off over time and need touch ups, this won’t happen with this coating.

Once it’s been applied, it will stay strong and stay on your deck for years to come.

As the coating is so thick, it’ll also bridge and fill in any hairline cracks in your deck. This stops the elements getting in and starting problems in it, especially in materials like wood.

It’ll cover many issues in the deck, so you won’t have to worry about them again.


2. It’s Elastic and Flexible

Over time, your wood deck will expand and contract.

There are several reasons why this will happen, but mostly it will be due to the weather.

When wood encounters wet weather, it will expand. This can lead to splitting and rot in your deck if left unchecked.

Heat will also have an effect on your decking, meaning that it’ll expand and contract as the temperatures to change.

Having an elastomeric coating on your deck means that your deck is protected from the elements, even as the wood changes size.

You won’t see chips or cracks in the coating, so you know it’s staying protected.


3. It Creates a Waterproof Shield

Water causes all kinds of problems for wood.

If the wood is left untreated, then water can get in and cause mold and mildew to develop.

Once it’s in there, it’s difficult to get out. You can treat it, but in a lot of cases you’ll have to replace the wood itself.

It’s a costly job, and one you want to avoid.

Elastomeric coatings are 100% waterproof, so your deck is protected. You won’t have issues with water damaging the wood, and it’ll keep your decking safe.

As mold won’t be able to grow on the wood, it stops the deck becoming slippery in the winter, as can happen when the wood isn’t treated.



4. Keeps It’s Color for Years

You can paint your deck and give it a new, bright color.

It’s one way of protecting the wood against the elements, but the problem is the paint color won’t last forever.

Most paints will fade, and in the sun that fading will happen even faster. It’ll also peel if not maintained regularly, meaning the deck will start looking old and tired.

An elastomeric deck coating, on the other hand, will keep its color for years.

You won’t have to worry about keeping it painted, as once the coating has been applied it will last for years to come. That deck will look good whatever the weather.


5. Helps Improve the Appearance of Your Deck

A deck looks great when it’s just been installed, but time and the elements will take its toll on it.

Rain and water cause mold and mildew, which grows on top and looks bad, as well as causing a safety hazard.

Paint flakes off over time, unless you spend a lot of time keeping it repainted.

If you don’t treat the wood, it’ll warp and bend over time making it unsightly.

Use an elastomeric deck coating though, and you don’t have to worry about any of these things.

It’s long lasting and avoids water issues, so there’s no mold or warping to worry about.

As stated in point 4, there’s no topping up of the color as it lasts for years without fading or flaking.


6. It’s Hard Wearing

As you’ll have seen, elastomeric coatings are some of the hardest wearing around.

It’s no wonder that they’re used on decks, as they’re a part of your home that needs some serious protection.

Once the coating has been applied, you won’t need to worry about it. Even with heavy use, that coating will stay on your deck, hard and fast.

Take good care of it, and it’ll take good care of your decking.



7. Helps Save You Money in the Long Run

Depending on the coating you use on your deck, you’ll be paying out to replace it every few years.

You want a coating that will last for years, so you don’t have to keep paying out to get it done.

Elastomeric deck coating is becoming more popular with homeowners, as they save a lot of money once they’ve had the coating applied.


Applying an Elastomeric Coating to Your Deck

If you’re convinced that an elastomeric coating is the right thing for your deck, then the best thing to do is get an expert to come and apply it for you.

These coatings are best applied by an experienced professional, so now’s the time to get your decking protected.

There’s lots of reasons why you’d want to consider an elastomeric deck coating for your home decking.

It’s long lasting, tough, comes in all kinds of colors, and looks fantastic.

Once you’ve had it applied, you’re good for years to come.

Get your application booked now, and you’ll have a deck that’s ready for anything.

Deck Deck Coating

Deck Refreshing

The weather can do a number on your deck, especially in the winter. The floorboards might be a bit worn and the handrails might be a bit wobbly. If this describes your deck, then you can do your own deck refreshing. Following these steps will help to give your deck that new finished look, and you’ll be good to go.

The first step is to inspect your deck. Look for loose fasteners, cracked joints, and rotted wood. Also remember to check the footings, posts, and beams underneath. Check the crevices of your deck and clean out any loose debris from the trees or other odds and ends. Next up get the hose and spray down the deck to loosen up all dirt, grime and stains. A high pressure nozzle will help really get those deep stains and caked dirt off. Sometimes you might want to consider using a deck cleaner to add an extra layer of cleanliness.

After your deck is all swept, hosed down and dry, it’s now time to paint and or stain. Most decks need a new coast of paint or stain every 2 to 3 years. As a side note, check the paint or stain you buy to make sure it has mildew and moisture resistance. Depending on how bad your deck is, it might require a couple coats to really bring it back. Once it is all dry, you can put all your furniture, BBQ, and other trinkets back. If you aren’t using the things out on your deck on a regular basis, it might be best to cover up the furniture and such.

For more information on deck refreshing visit Bob Vila HERE

Deck Coating Deck Water Proofing Maintenance Tips

Deck Maintenance Tips: 3 Ways to Keep Your Deck in Top Shape

An outdoor deck is a wonderful place to enjoy peace and quiet or to have outdoor gatherings with family and friends. If you live in a warm, mild climate, such as Santa Barbara or Malibu, then an outdoor space is ideal for enjoying the lovely weather. Therefore, in order to enjoy the beautiful outdoor climate, it is imperative to perform regular maintenance on outdoor decks. Regular deck maintenance will protect your investment, prevent costly repairs and ensure that you receive countless years of usage out of your outdoor space. There are a number of actions that homeowners can take to ensure that their deck looks great. Read below for a few of the easiest ways to keep your deck in top shape.

Deck Deck Coating

Top Acrylic Deck Coatings for Homeowners in Santa Barbara, California

As summer quickly approaches, many homeowners in Santa Barbara, California are searching for a durable coating for their deck. Water-based 100 percent acrylic coatings are often a good choice as these products can create a flexible protective film that is resistant to the sun’s glaring rays. The three most popular types of deck coverage products are semi-transparent acrylic stains, solid color acrylic stains, and wood restoration acrylic coatings.