Roof Repair Roofing

Roof Wind Damage: A Guide For Homeowners

Do you have roof wind damage? It’s unfortunate but it does occur. Here is a helpful guide to follow.

Your roof is what stands between you and the elements, so of course, it’s going to take a lot from the weather. One of the most common ways it gets damaged is from high winds. What does the wind do to your roof, and can you avoid roof wind damage?

Here’s your guide to help you minimize the wind’s effects.

How Strong Do Winds Need To Be For Roof Damage?

Firstly, it’s a good idea to understand just how strong the winds need to be before they start damaging your roof. What you’ll find is that they do need to be fairly high before your roof starts seeing the effects. At 45 mph or below, you shouldn’t see any damage to your roof. It’s a strong wind, and it will impede you if you try to walk through it, but your roof should hold strong. Even though you can hear the wind outside, you shouldn’t have anything to worry about.

However, once winds hit around 55 mph and above, that’s where you’ll start seeing structural damage. If you have a shingled roof, the shingles can start to lift off at this speed. When winds get faster, the damage to your roof will mostly come from debris hitting it. For example, loose branches from trees can come off and hit your roof, causing damage.

What Damage Can You Expect From High Winds?

Once a storm has passed, you can inspect your roof if it’s safe to do so. You’ll need to check for any downed power lines or loose items on your property that would make inspection unsafe. Look for the following, as the sooner you catch the damage, the sooner it can be repaired.

Missing shingles:

This will be common if you’ve had severe winds and have an asphalt shingle roof. If they’ve been lifted off, then they’re leaving gaps in your roof that water can get through. That can lead to leaks over time, so have the shingles replaced ASAP.

Lifting or curling shingles:

The shingles may not be missing, but they can take damage during a storm. Most commonly, they can start lifting up or start to curl. Either way, they won’t be protecting your roof anymore, so you’ll need to replace these, too.


If there was rain during the storm, take a look for any leaks in your home. These can show up in a variety of different ways. For example, you may see water stains on the ceiling, or water dripping from wet spots. Get into your attic and check for wet spots, as that shows that there’s some damage to the structure of the roof.

Damaged gutters:

This is something that should be easy to spot from the ground. High winds can pull gutters away from the building, That will, of course, let water run down the roof and the sides of the building, which can lead to water damage.

Even if the gutters themselves aren’t damaged, you’ll want to take a look at them. If there’s a large number of granules in them, that’s another sign that the roof is at risk of leaks and further damage. If you do see this, you’ll need to get help as soon as possible.

Damaged flashing:

Flashing is what protects the joins in your roof, but it can take damage in strong winds. This is especially true around the chimney, which is a high-stress point during high winds. Look for flashing that has separated or started to crack. It won’t be able to protect your roof if another storm comes through, so it needs to be replaced.

What To Do If You’ve Had High Winds

What should you do when you’ve had a storm come through your area? It’s important that you check your roof as soon as you can while still being safe. Firstly, go out and check the area is safe, as described above. Inspect the roof from outside, on the ground. You can pick up on most damage this way. While you’re outside, pick up any debris you find.

Go inside, and look for any signs of water damage. If you do find signs, take photos of them. Then, call on professional roofers to take care of it for you. The sooner you do this, the better.

How To Minimize Roof Wind Damage

If you do get regular storms, you’ll want to minimize the roof wind damage during them. There are some steps you can take to ensure that these storms won’t cause overt amounts of roof wind damage:

Select your roofing material carefully:

If you’re having your roof replaced, think about the material you use. Asphalt shingles are great because they’re a budget friendly option, but they’re not great when pitted against the wind.

Instead, you can pick a material such as metal roofing. These are installed in large sheets, so there’s less place for the wind to get under them and cause damage. You can have metal roofs that are made to look like tiled roofs, too. They have a lot of other benefits, so it’s something to consider.

Remove and trim trees:

Trees can do a whole lot of damage when there are high winds. If the storm is severe enough, the wind can still blow tree branches onto your roof, but you can still minimize the damage. Remove any trees close to your home, and trim back branches. If you’re removing the loose branches before a storm, there should be less that blows onto the roof.

Protect your gutters:

Finally, it’s a very good idea to protect your gutters from storm debris. It can build up and cause blockages, leading to overflowing water and ice dams in the winter. You can insert gutter guards onto the gutters, which will stop the debris in its tracks.


With this guide, you’re now ready to protect your roof against high winds. Choose the right materials, and correct any damage to your roof as soon as you see it. If you’re prepared, roof wind damage can be kept to a minimum.


Roof Repair

Why Hire Professionals For Roof Shingles Repair?

Do you need a roof inspection or more specifically roof shingles repair? If you do, it’s always best to hire the experts who will get it done right. Read on.

The weather can do a number on your roof. After any bout of bad weather, you can step outside and see that your shingles have suffered damage. They can start to cup or crack, suffer bruising from hail, or even just be missing entirely.

You can replace them yourself, and there are lots of how-to guides online showing you how to do so. However, in most cases, you’ll get a better result from hiring professionals to handle the roof shingle repair for you.

Here’s why you should hire them, rather than trying to handle it yourself.

When To Repair Your Roof 

How do you know when you should repair your roof? It’s not too difficult if you’re doing regular checks on the roof. Most of this can be done from the ground, looking up at it. It’s even easier if you have a pair of binoculars.

When walking about your roof to inspect it, look for any signs of damage. As mentioned above, this can involve broken, bruised, or cupped shingles, which are a sign of water or hail damage. You’ll also want to look for any shingles that are missing.

Once that’s done, you can check inside your roof by going into the attic. If there are any chinks in your roof’s armor, you’re going to see it here. For example, there may be wet spots, damp and mold where water is getting in. There may also be sunlight shining through where shingles are missing.

If you see any problems during your inspection, then you’ll need to have them repaired as soon as possible.

Should You Repair Or Replace?

Once you see those problems, you’ll need to consider whether the roof can be repaired or replaced. This is a question to put to an expert, as they will be able to give you a better answer.

Commonly, if the roof is coming to the end of its lifespan, then it should be replaced entirely. Typically, an asphalt shingle roof will last around 25 years. If yours is around that age, then repairing will be the best option. If it’s still relatively new though, then you can go ahead and do repairs.

There’s also the extent of the damage to consider. If you’re just looking at a few shingles that have come loose, then a repair job is fine. If the damage is more extensive, such as extended water damage to the roof structure, then only replacement will fix it.

Again though, an expert will be able to give you a much better idea of what needs to be done, so you can ask them what should be done to your roof.

What’s Involved In Roof Shingles Repair?

If you’ve decided that the roof shingles need repair, what’s involved? Usually, the job shouldn’t be too long or complicated, if you’ve caught the problem quickly. If it’s just a few shingles that have broken or come off, then roofers can just come in, attach new shingles, and be done.

If there’s some more work to be done, then it may take a little bit longer. For example, repairing sections of the roof structure that was water damaged will take longer and require more expert work.

This is why it’s often a good idea to call in experts to handle the job for you. They will be able to see what needs to be repaired and carry out the work efficiently. It’s a lot easier on you, as you may miss essential repairs that need to be done.

Get An Expert Eye

On that note, it’s worth pointing out that it’s always worth having a roofing expert take a look at your roof. As they have the experience, they’ll be able to see anything that needs repairing, even if you missed it. They can get on your roof safely too, so they can get a closer look at the shingles and the repairs that need doing.

Because of this, it’s really worth the time and money to call out a roofing team. They’ll spot any issues that you missed, meaning they’ll get fixed faster, and you won’t need to worry about extra repairs further down the line.

Always Safer To Hire Professionals 

One of the main reasons you should always hire a professional to handle your roof is that of safety. Working on your roof in any kind of capacity is always going to be dangerous, because of the slip and fall risk. No matter how experienced you are at DIY, you could still fall and seriously hurt yourself or worse when trying to fix the shingles.

When you hire experts to handle the repairs, they have all the experience needed to stay safe while they’re on your roof. They’ll work in teams too, so they can all help each other stay safe while they’re repairing any damage.

As well as this, they’ll have the required safety equipment needed to keep themselves safe. This can include things like scaffolding, which the average DIYer won’t have access to. As such, you should always call in the experts to repair the roof safely.

Cost-Effective In The Long Run

Many people think about replacing their own shingles because they think they’ll save some money. There’s no denying that roof repairs cost money, and taking care of a roof can get pricey. However, it’s actually more cost-effective to call in the experts first.

Why? Because if the experts are doing the repairs the first time, then they’ll be done right the first time. If a repair is done incorrectly by a DIYer, then it may lead to more repairs, and more cost, later on. Call in that expert and you’ll actually save money.


As you can see, there are all kinds of reasons to call an expert to take care of your roof shingles repair. They have the expertise and the equipment, saving you money and headaches later on. If you need help with your roof, it’s always best to call an expert.


Roof Repair

5 Reasons For A Leaky Roof, And How To Fix It

How much do you know about fixing a leaky roof? It can be difficult to figure it out on your own. So here is a helpful guide to follow.

If you’re finding leaks in your roof or water stains on the ceiling, that’s a sign that the roof isn’t holding the rain out of your home as it should. You should always take leaks seriously, as they are often a sign of a deeper issue. If you’re seeing water dripping in your home, you need to know why it’s happening.

Here are some of the most common reasons your roof is leaking, and how to fix it.

1. Your Shingles Have Broken

This is a very easy issue to spot. If you have any leaks, go outside and take a look at your roof. Are there any shingles that are cracked, broken, cupped, or even missing? If so, that’s where the water is most likely coming in. Those shingles are your first line of defense against the rain, so you need them to all be in place and ready to face the weather.

They can be damaged by various different things. Strong winds can lift them off, falling debris can crack them, and even walking on the roof can knock them out of place.

How to fix the issue: This one’s quite a simple fix. All you have to do is replace the shingles that have been broken with new ones. It’s advised that you keep an extra box of shingles when you replace your roof for this purpose, so the shingles will match. Use a pry bar to pry the row of nails on the damaged shingle up. Pull out that shingle and replace it with a new one, securing it with new nails. 

2. You Have An Ice Dam 

This is a problem you’re more likely to come across in the winter months. An ice dam forms when snow melts off your roof due to heat coming from the attic. It then refreezes at the edge of your roof, sometimes in the gutters. The temperatures are colder here, so the frozen water sits, blocking more snow run off from making its way off the roof. The water backs up, gets under shingles, and starts leaks.

How to fix the issue: One of the best ways to prevent ice dams is to invest in a roof rake. This gives you the ability to remove snow from your roof without having to get up there, something that’s dangerous at the best of times. You’ll be able to stay on the ground, eliminating the risk of slipping and falling. It’s best to remove at least the lower four feet of snow regularly, to prevent build up. If you do see an ice dam forming, you can use an ice melt product to dissolve it.

3. Your Gutters Are Clogged

Another similar reason for leaks is clogged gutters. Over time, your guttering can easily get clogged up with all kinds of debris, such as leaves from nearby trees. If this is allowed to build up, it will stop water from flowing down into the drains. This will again allow water to back up onto the roof, and cause all kinds of issues including leaks.

How to fix the issue: This one is quite a simple fix. All you need to do is grab a ladder, some gloves, and a trash bag, and start scooping all the debris into the bag to unclog the gutters. Once that’s done, you can take some preventative steps too. For example, you can install gutter guards, and trim branches to ensure they aren’t too close to the roof.

4. Your Flashing Is Cracked

The flashing on your roof is the strips of metal that sit under shingles and protect all the seams around the roof. For example, there’s flashing between the roof and your chimney, and on all joints. They create a water resistant barrier and protect these entry spots.

While the flashing will last for a long time, it will eventually crack and break. This is usually because the tar that had been used to seal them has worn away and left it open to the elements. Over time, that corrodes the flashing and allows it to crack.

How to fix the issue: Once you’ve found the flashing that has broken, you’ll need to replace it. You can call on a roofing company to do this for you if you feel you won’t be able to do it yourself. Replacing it isn’t too difficult if you have the skill, though. You’ll need to remove any shingles that are in the way and remove the cracked section. Place a new section of flashing in its place, and then apply roofing sealant to the nail heads you used.

5. The Skylights Weren’t Installed Properly

With more people extending their homes by finishing their attics, skylights are a great way to add in natural light. These windows need to be fitted properly through as if they aren’t, they leave the roof susceptible to leaking. If there are wet spots or drips along the sides of the skylight, then that’s a sign it was installed incorrectly. If the dripping is coming from the top, that’s a sign the flashing needs to be fixed.

How to fix the issue: Firstly, you’ll want to check for any cracks in the window itself. If there are any, these can be sealed with a layer of silicone to stop the water. You can also check the flashing, to see if that needs to be fixed.

In many cases though, the cause of the leak is improper installation. You’ll need to call on the company who fitted the windows for you, to put it right. Do this as soon as possible, to ensure that your roof won’t sustain more damage than it has to.

Fix Your Leaky Roof

There are several reasons why you have a leaky roof, and these are some of the more common ones. If you are seeing water making its way into your home, check for these issues, and correct them as soon as you can.


Roof Repair

5 Causes Of A Sagging Roof (And How To Repair It)

Inspections are important to do if you see a sagging roof. But what to look for that may be the cause? Here’s what to know and how to fix it!

Your roof is such a crucial part of your home. It’s what protects you from the elements, so you need to be sure that it’s in the best condition possible. A roof in good condition should be totally level, so if you’re seeing sagging in your roof, that’s a cause for concern. Here’s what’s causing it, and how you can put it right.

1. Water Damage

This is probably the most common reason why roofs start to sag. Your roof is exposed to the elements all year long, and so it’s dealing with wind, rain, snow, and more. Water can really do a number on the roof, as it can get in and start causing damage. This includes allowing wood to rot, so the structure of the roof becomes damaged and the roof begins to sag.

2. Weakened Roof Structure

When your roof was first installed, the wood used in creating it was in its best condition. Over time though, the wood in the structure has taken on damage. That can be water damage as described above, or it could be a number of other things. For example, if they’re incorrectly positioned, then that can lead to sagging. Pests such as termites can cause damage to wood too, creating more problems overall.

3. Bad Workmanship

When you’ve hired a roofing service to take care of your roof, you want to know they’re doing their very best. If you do your research and look for the right team, you should have the best people to help you get a quality roof installed.

If the workmanship isn’t of the best quality though, you’re then going to deal with the issues that causes. If items aren’t installed correctly, that’s going to cause a knock on effect on your roof. For example, if you have your attic converted into a room and the roof lights aren’t installed without appropriate support, that’s going to lead to sagging.

4. Excess Weight 

This is another very common reason for roof sagging, as it can happen very easily. Excess weight usually comes from snow, when it settles on your roof. The added weight of that snow will be more than the roof is designed to take, and so it will start to sag under it. Left long enough, your roof could even collapse under that weight.

5. Ageing

While a roof may have been installed perfectly, it could be that its age is causing it to sag. Over time, the roof materials are going to wear out, and they won’t offer the same quality as they once did. If your roof is over 30 years old and you’re seeing sagging, that’s a sign that it has come to the end of its lifespan.

How to Fix And Prevent a Sagging Roof

Now you know why your roof is sagging, you can start work on repairing the damage. Knowing what is causing the sagging is vital though, so if you’re not sure it’s always best to call in the experts, so they can diagnose the problem for you.

Do Regular Roof Inspections

The best thing you can do for your roof is to make sure you’re doing regular inspections. If you’re keeping up with them, you’ll be able to spot any issues quickly, before they can get worse. That’s good for you, as the repairs are likely to be easier and cheaper, too.

Start your inspection from the ground, looking at the outside of your roof. You’re looking for anything that’s damaged,d such as missing or broken shingles, broken flashing, and so on. You’ll also need to get up into your attic to see what’s happening on the inside. You’ll be looking for signs of damage in the rafters, as well as any light shining through the roof. That will be a sign that shingles are missing and need to be replaced.

Keep these up, so you can ensure that you’re catching problems as and when they happen.

Brush Snow Off the Roof 

If you’re in an area that gets regular snow, you’ll want to keep an eye out for snow settling on it. This leads to extra weight issues, as well as the possibility of ice dams. The best way to get snow off the roof is with a snow rake. These can be operated from the ground, keeping you safe. When you do use them, ensure that you’re taking care with them, so you don’t knock shingles off the roof.

Hire the Right Roofers

You can avoid all kinds of problems if you hire the right roofers to come and take care of your roof for you. While there are many roofers out there that do top quality work, there are plenty of others that won’t. To ensure you’re getting the best people, talk to friends and family to get recommendations, and check sites like the Better Business Bureau to see what they have to say about companies in your area.

Avoid Water Damage Where Possible

While your roof is always going to be under siege from the wind and rain, you can ensure that the roof has the best defense. When you do your inspections and see things like shingles or flashing missing, you can repair them ASAP. That ensures that chink in your roof’s armor is sealed quickly before any water can get in and cause damage.

Replace Your Roof 

If the roof is sagging and it’s over 30 years old, then the best thing to do is have it replaced. While you could repair the roof, you don’t know how long you’ll get from those repairs before you start to see sagging again. It’s better to have the whole roof replaced, so you know your home is protected.


As you can see, there are all kinds of ways how a roof can start to sag. If you take action quickly though, you’ll be able to put it right. Always call the experts to diagnose the problem and help repair it, and your roof will be as good as new.

Roof Repair Roofing

Loose Roofing Granules: What Does It Mean?

Roofing granules play an important role when it comes to roof protection, which is why it’s ideal to take action if you notice granule loss. Read below for more.

There are many parts that make up your roof, and granules are just one of them. They have an important part to play in protecting your roof, and ensuring it lasts for as long as possible. If you start losing roof granules, what does that mean? Is it a problem? Here’s everything you need to know about your roofing granules, and what to do if you are losing them.

What Are Roofing Granules?

Roofing granules are one of the three layers of roof shingles, and are important in protecting them. They sit on top of the fiberglass and asphalt layers. They’re usually made from crushed stone and minerals. They can be almost any size, shape, and color as different manufacturers can offer different styles to you.

Granules are used for several different reasons. Firstly, they protect the roof against UV light. That helps the roof avoid heating up, and so making it more energy efficient. They also contribute to the overall color of the roof.

What’s interesting is that roofing granules can also include copper as part of their make up. This helps reduce the growth of algae for a while after installation. This helps the roof keep its color, and stops water from getting trapped against the shingles.

Should You Worry About Granule Loss?

You may see some granules washing off the roof, especially after a rain shower. Some loss is normal, as the layer won’t last forever and will come away over time. However, if you’re seeing more granules coming away than normal, then you’ll need to look into the cause of it. There are several reasons why you may be losing granules, so look out for the following.

Reasons You’re Losing Roofing Granules

The roof is aging: This is the most common reason why you’re losing granules. For most of your roof’s lifespan, the granules will stay on the roof. There’s a bond that’s holding those granules onto the roof shingles. Over time, that bond will wear out, and the granules will become loose and fall off the roof.

This is usually a good sign that your roof is getting old. An asphalt shingle roof will last around 15 – 30 years, so if you see this happening, it could be nearly time to have the roof replaced. It’s a good idea to inspect the roof, and see if you can find any other signs of wear and age.

The shingles are defective: This doesn’t commonly happen, but it’s something to look out for. Your shingles could experience blistering, where moisture forms in the asphalt layer and expands, forming the blister. As this happens, the roofing granules will become loose and begin coming off the roof. 

Again, you’ll need to inspect the roof and see if there are any instances of defective shingles. If it’s only a few of them, then you can easily replace those shingles yourself. If there are large patches that are blistering, then it’s time to call in a roofing professional.

You’ve had storms recently: Storm damage is a common cause of roof granule loss. If you’ve had heavy storms recently, look out for granule loss. If you’re seeing more than usual, that’s a sign that the shingles have been damaged by the storm. This is is especially true if you experienced hail. With that damage, water can start getting into your roof and causing all sorts of problems.

The roof wasn’t cleaned correctly: When cleaning your roof, there are some rules that you must follow. If you don’t clean it correctly, then you run the risk of damaging the roof and leaving yourself open to further problems.

If you’ve cleaned your roof with a pressure washer, you’ll start to see the granules coming away. This happens even if you use the washer on low power. Instead, look into gentler ways of washing the algae and moss off your roof.

Physical damage in a specific location: Your roof isn’t designed to be touched or walked on often, otherwise those granules will start coming away. If you’re seeing roof granule loss, take a look at the shingles as there may be a physical cause. 

For example, there may be a tree branch rubbing against the roof, pests may be getting into the roof, or you may have gone up to the roof one too many times to fix the satellite dish. You’ll need to correct these problems so you won’t see that loss.

Bad ventilation: Another cause of roof granule loss is poor ventilation in your roof. You may see that your attic gets hot, especially in the summer. If the roof wasn’t installed correctly to the right calculations, then it creates a ‘convection oven.’ This overheats the shingles, leading to granule loss.

How To Avoid Roof Granule Loss

Are there any ways you can avoid losing the granules on your roof? While some loss is to be expected, there are some ways you can slow it down.

Cut back trees: Keep all tree limbs at least five feet away from the roof of the house. This stops from them getting blown into them during storms, causing damage.

Remove debris: After a storm, look for any debris that has been left on the roof. Remove it as soon as possible, so it can’t cause any damage. 

Perform regular inspections: Regularly check your roof for any issues, including granule loss. The quicker you catch a problem, the easier it will be to fix.

Call the experts: If you’re ever unsure what’s causing the problem, make sure you’re talking to a professional about it. They will be able to come and diagnose the issue for you.


The roofing granules on your roof are more important than you know. While some loss is normal, extra loss is a sign of damage or of age. Keep an eye out for this, and get help if you see it.

Roof Repair

5 Signs Of Roof Storm Damage And What To Do Next

If you suspect roof storm damage, then you’ll need to handle it right away as having a secured roof for your home is important. Here are 5 signs to look out for and what steps to take next.

Your roof is one of the most important aspects of your home, and one that you need to take good care of. If your roof sustains damage, then the rest of your home is at risk. How can you tell when a roof has been damaged in a storm, and what should you do if the damage has already occurred?

Here’s everything you need to know.

5 Signs of Storm Damage to Your Roof

After any storm, you’ll need to go out and check your roof. In most cases, you can do your inspection from the ground or in the attic. If you’re unsure of anything though, it’s always a good idea to call a professional and have them take a look for you.

Here’s what you should be looking for when you do your inspection:

1. Broken or Missing Shingles 

This will be the most common sign of damage on your roof. In bad storms, those shingles can come loose and even come off entirely. They could also start to cup or buckle as they become saturated with water. Either way, that is now leaving a chink in your roof’s defense, where water can get in.

2. Broken or Missing Flashing

This is a similar sign that you should be looking out for. Flashing is strips of material that cover t5he joins in your roof, especially around areas like your chimney. Again, if that’s broken or missing, it can be letting water in.

3. Water Leaks in the Home

Did you develop a leak somewhere in your home after a storm? That’s a sign that there’s damage to the roof somewhere. You may see dripping water, or a water stain appear on the ceiling.

4. Clogged or Broken Guttering

When inspecting your roof, make sure you check the guttering too. During a storm, debris, such as leaves, gets blown around. They will end up in your gutters, clogging them up. You may also find broken guttering if it was a bad storm. This is something that you’ll need to handle quickly, as that guttering won’t be able to direct water away from the house.

5. Moisture in the Attic

Make sure you’re checking your attic as well as outside the roof. If you find there’s moisture in there after a storm, that shows you that water is making its way in somewhere. Moisture is also a sign of other problems, such as poor ventilation. If you’re inspecting your roof regularly, you should be able to tell if this is a new problem after bad weather.

Types of Storm Damage

There are a few different types of storm damage that your roof can sustain. It pays to be aware of this, so you know what you’re looking for during an inspection:

Wind damage: Storms usually come with high winds, and these cause havoc on your roof. That wind can get under shingles and pull them loose, as well as blowing away granules and blowing that debris into the gutters.

Hail and snow damage: If you have a snowstorm in your area, then this can bring a whole new set of problems. If the gutters are clogged, this leads to ice dams that then allow water to back up onto the roof. The hail can also ‘bruise’ your shingles, rendering them less likely to protect your roof from water.

Water damage: This is a big danger when it comes to storm damage. With storms come rain, and that rain can get into your roof through several different avenues. Once the water is in, it creates leaks, mold, and wood rot among other issues.

What to Do Next 

Now you’ve done your inspection of the roof, what do you need to do next? The golden rule is to address the problem as quickly as possible. The longer damage is left, the longer it will allow the roof to fall into disrepair.

Next, you’ll need to consider whether you’ll need to call in professionals to help you correct the damage. There are some smaller jobs you can do yourself, but remember that roofing is a dangerous job. If you’re ever unsure of what to do or feel that you don’t have the skills to take on a role, then you should always call on the professionals to help.

Replace shingles and flashing: If any shingles or flashing are missing, then they need to be replaced right away. Remember, the longer they’re missing, the longer water has a way into your roof. This is something you can do yourself if you’re confident, but it’s usually best to have roofers do this.

Clear out gutters: This is a simple task and one you can do right away. Grab a trash bag and start pulling any debris you find out of the gutters. This will allow water to flow through, so it won’t back up on your roof. Consider installing a gutter guard to help with this.

Brush snow off the roof: If you’ve had a snowstorm, then you won’t want water sitting on your roof for too long. You can use a roof rake to safely brush that snow off, all from ground level.

Ask for a professional inspection: If you haven’t already, make sure you call in a professional roofer to take a look at the roof for you. They will inspect it from the inside and out, and recommend any repairs that need to be made. With their help, they’ll be able to get your roof in top condition so it can weather more storms in the future.


If a storm blows over your area, there’s no need to worry too much. If you get out there as soon as it’s over and see what needs to be repaired, then you can avoid most large repair jobs. The key is to address it quickly, so you won’t have to worry about the roof getting more damaged over time. Call the professionals, and they can do all the right repairs for you.

Roof Repair Roofing

6 Benefits of Using a Professional Roof Repair Service

Maintaining your home can be quite stressful, especially when it comes to your roofing needs. For assistance, it’s best to use a professional roof repair service. Read for more details.

Fixing your own roof offers some advantages. It gives you a new perspective on the neighborhood, which can brighten up your day. Learning a new skill might freshen life up. And repairing your own roof gives you the satisfaction of taking the initiative and doing a job yourself.

While there are certainly benefits to doing your own roofing, there are also advantages to having a professional do it instead. It might surprise you, but one of them is savings in terms of time and money.

Consider the following advantages professionals bring to roof repair.

1. Quality Workmanship with Warranty

Repairing the roof correctly using proper roofing, waterproofing materials, and manufacturer recommended procedures require knowledge and experience. Professional roofing contractors usually have their crew trained by manufacturers and follow all the manufacturers’ guidelines in their installations.

Also, a reputable roofing contractor usually provides warranty for their work so the homeowner can have the peace of mind that the job is done right.

2. Save Time

There’s nothing more frustrating than having to do a job again and again. This is especially true for a time-consuming job like repairing your roof, where you will find that familiar leak again all too soon if it isn’t properly repaired. Having a professional take care of the roof instead lets you save in a variety of ways.

First, a professional can get a job done right the first time, which means you save time by not spending yours on the same job again and again. More importantly, though, you save yourself from stress. Knowing a job is completely finished allows you to focus on more important things instead of worrying if it’s really taken care of.

3. Avoid Risk

Professionals face fewer safety risks as they repair your roof. Experience and proper equipment go a long way toward safety.

In the winter, roofing safety is especially important. Too many accidents happen as people install or remove holiday decorations or fix satellites in cold, icy, or snowy weather. This is a terrible time for an accident to happen.

Unlike most laypeople, professionals have proper safety equipment that helps them handle adverse weather conditions. Their experiences also help them know how and when to use it. As an added protection, most professionals have insurance and access to Worker’s Compensation benefits. Injuries to them are less likely physically and less painful financially than injuries to you could be.

4. Invest Where You Want To

You already know that doing things right requires the right equipment. But you may not have all the tools necessary to repair your roof satisfactorily. A professional will only have to invest in tools once to complete a number of jobs.

You will probably not be roofing as often as a professional, which means a large investment in roofing tools might not pay off in the long run. In contrast, a roofer has already invested in all the tools her or she needs.

5. Benefit from Connections

Most people know that buying in bulk tends to lower prices. This means that a professional roofer can probably buy materials like shingles at a better rate than you can; unless you want a lot of backup stock for next time.

In addition to bulk discounts, roofers may also have longstanding business relationships, which can result in further discounts.

6. Catch Future Problems Early On

Perhaps you know the signs of a termite infestation, but you might not know how to tell if it is ongoing. Or maybe you can identify rotting wood, but you need a specialist to determine if it needs to be replaced or not.

Having an experienced roofer work on hand lets him or her inspect for other damages. He or she might notice growing problems that you would have missed entirely.

Looking Out for Roof Repair Needs

As a homeowner, you need to be on the lookout for roof repair needs. While you might not think about your rooftop until it malfunctions, it would be wise to practice preventative steps on a regular basis. This crucial structure protects everything else in your abode.

If you fall down on your vigilance, your property could wind up severely damaged. When insurance companies learn that there was neglect on your part involved, they may not even pay your claims after a storm.

Perform an Inspection

In order to perform an inspection, you will need to climb up on top of your house.

  • Haul out your ladder and climb up there with a broom.
  • Walk around the entire area, sweeping off any debris that may have landed. There may be branches, leaves and old newspapers accumulated up there, so sweep everything off and carefully inspect every square inch for problems.
  • A pile of wet leaves, loose or cracked tiles, and missing shingles can lead to potential leaks and the need for roof repair.
  • The metal flashing should be fastened down securely, as well.

Check the Gutters

Next, take a look at the functionality of your rain gutters. These devices are designed to keep water from pooling on your rooftop.

Make sure their pathways are clear and not clogged with branches, mud, or leaves.  Although many gutters are now made in a seamless configuration, some still have connecting parts.

During your inspection, make sure all parts are connected and ready to do the job. If you keep these mechanisms working efficiently, you will cut down on the possibility of problems.

When you do spot trouble, it’s important that you call a roof repair company right away. Roofing contractors have expertise with troubleshooting solutions, so your difficulties can be remedied quickly.

Do your part and perform inspections twice a year; if you notice areas that need attention, get on your phone to call a professional as soon as possible.

Decide for Yourself

Ultimately, you decide whether you can better afford to repair a roof yourself or hire a professional roof repair service. But with the various advantages professionals have, you may well save in the long term by investing in experienced help.

Roof Repair

Flat Roof Repair: The Best Roofing Materials To Use

Flat roof repair can be tricky when there are a lot of factors to consider and roofing materials to choose from. Read the detailed guide below to help you.

There’s a lot of reasons why you should have a flat roof installed on your home. They’re perfect for home extensions, in areas where people may have to access them. They’re often cheaper too, perfect if you’re trying to control costs. Plus, they have a much more contemporary look. If you have a flat roof though, you will need to watch out for some common problems.

Here’s how to repair your flat roof, and see which materials are best for repairing damage.

Flat Roofing Materials

Even before you have your flat roof installed, you should think about the materials used in making it. This will affect the longevity of your roof, and how you go about repairing it.

Here are the most common materials used in creating these roofs.

EPDM: EPDM stands for Ethylene Propylene Diene Monomer, and is a popular roofing choice. This roofing material can be installed in one piece without the need for joins, depending on the size of the roof. Plus, it’s highly lightweight and elastic. These can last up to 50 years if installed properly.

GRP: GRP roofing, or Glass Reinforced Polyester roofing, is another popular choice. This is an option that works well for complex shapes, as it’s easily cut to the right shape for your roof. It’s also designed to be installed at varying temperatures, so you’ll get the best result when you have it installed. Again, this should last for at least 50 years.

Bitumen Felt: This is the classic roofing material for flat roofs, and is still a good choice for many home owners. This is installed in a ‘pour and roll’ method, where the bitumen is heated up in a boiler and poured onto the substrate. Layers of membrane are also placed between layers of bitumen, to create the perfect roofing material.

Modified Bitumen: This is also known as ‘torch on’ felt. It comes in a roll format, and is laid out over the roof. Then, a torch is used to heat it to the correct temperature and affix it to your roof.

Single Ply Membranes: These are a variety of materials, such as PVC, TPO and TPE. They’re lightweight and flexible, making them perfect for slopes and large areas. They’re also highly fire resistant, something that you’ll be looking for in a roofing material.

Green roofs: Something that’s becoming more popular is the green roof, where a layer of vegetation is placed on the roof. It looks amazing, and is fantastic for the environment. They also help reduce noise pollution in your home, and create habitats for insects and butterflies.

Which should you choose? It’s very much up to you as the home owner. You’ll have to take into consideration the size and shape of your roof, the cost of the materials, and the longevity of the roofing material.

For example, if you want to save some cash and are happy to have a roof that last around 20 years, then a torch on roof will be perfect for you. But, if you want to get a roof that lasts longer, and will be resistant to leaks and growth, then the EPDM roofing material will be better for you.

How to Repair Your Flat Roof

No matter how well your flat roof was installed, there may be some problems that you have to deal with.

Here’s how to repair common issues and keep your roof in good condition.

Leaks and Water Damage: These are by far the most common issues you’ll have with a flat roof. While most flat roofs aren’t actually totally flat and allow for drainage, some do fall victim to ‘ponding’. This is when when water stands on the flat roof. That’s a problem, as the water will escape at some point, and that’s going to be into the roof structure. This leads to wood rot and damage, and water stains on your ceilings and walls.

To repair the leak, you will need to find where it’s originating from. You can get on the roof and look for a tear or hole in the material, as that will usually be where the water is coming in. Once you’ve found it, you can seal it up or use a roof patching kit to seal up the hole. If the damage is too great, consider having the roof replaced.

Debris Damage: If debris makes its way onto your roof, it can cause all kinds of damage. For example, a falling branch can punch a hole in the roof. Fallen leaves will collect in gutters, allowing water to back up and again lead to ponding. You want to avoid these issues if at all possible.

Trim back trees, so they don’t pose a danger to the roof. Clear your gutters regularly, or install a gutter guard so water can still flow freely away from the roof. If you inspect your roofing regularly, you can avoid these problems before they even happen.

Rusted or Missing Nails: Some roofing types will require nails to hold them onto the roof. Over time, they can become rusty or come out of the roof, leaving entry holes for water. Again, inspections are the best way to tackle this. Get up and take a look at the roof. If you see any nails that are rusty or missing, replace them so water can’t get into the roof.

Vegetation on the Roof: Growing vegetation is a problem on any roof type, but it often happens on flat roofs. Mildew and moss are commonly found growing if the roof is often wet, so this is what you’ll need to tackle if you find it on your roof. Check your drainage, and ensure that the roof has enough of an angle to drain properly.


With these tips, you’ll be able to pick the best roofing material for your flat roof, and fix any issues you have with them. If you’re ever unsure, talk to a roofing professional so you know exactly what needs to be done.

Read More:

How Roof Coating Can Reduce Emissions, Save Money and Keep Your Home Cool

Roof Repair

6 Best Roof Ventilation Options For 2020


Ventilation of your home is often overlooked, but it’s an important part of keeping your home healthy. This year, check out the best roof ventilation options to keep your home safe and protected.

Looking to make improvements to your roof this year? Then you need to take a look at improving the ventilation. It’s something that’s very much overlooked, but is vital for keeping your roof in the best possible condition. Here are some of the best roof ventilation options on the market, so you’ll get the most from your vents.

Why Ventilate Your Roof?

When you talk about roofs, you’re often talking about keeping things out of it and keeping it sealed. Water and moisture are severe dangers to the roof. If it gets in, it will create mold and rot that damage the structure. In some cases, it will even necessitate the replacement of the roof itself.

Roofing styles have come a long way, and now they’re more airtight and watertight than ever before. That’s great for keeping water out from the outside, but what about the inside?

As you go about your day you’re going to create water vapor, and that’s going to find its way up to the attic of your home. If there’s no ventilation, it can’t escape out into the atmosphere. If it’s trapped, it’s going to settle in your attic and cause those moisture problems described above. As you can see, it’s vital that you allow the vapor to escape.

Best Roof Ventilation Options

You see how important it is to ventilate your roof properly. Here are some of the best roof ventilation options for you. Check them out and see what would work with your roof.

 1. Box Vents

These are a very common style of vent, and are known by several different names. They may be called Turtle Vents, Flat Vents, Low Profile Vents, or Louvers. They’re a static vent, meaning that they have no moving parts. Instead, they use natural convection to draw warm air out of your attic and into the air outside. They’re often installed close to the roof ridge, in order to be able to draw out as much warm air as possible.

These vents can either be made from metal or hard plastic, and come in all kinds of colors to match your roof. That makes them good if you’re looking for something unobtrusive for your roof. However, be aware that they’re not as effective as other models, so you’ll need to install several of them to get the best effect.

 2. Power Vents

These vents, also known as PAVs (Power Attic Vents) are essentially the motorized version of the box vent. They have a similar low profile as box vents do, but they have a motor that’s designed to pull warm air out of your attic. Some even come equipped with thermostats, that will kick in the motor once your attic reaches a certain temperature. Others will have humidity detectors, that will turn on the motor when humidity levels are too high.

Of course, these vents need power to work. They’re most commonly hardwired into your power supply in order to get them working when needed. They’re seen to be very effective, cooling your attic up to 20 degrees. However, they’re so powerful they can pull out conditioned air too, making it hard to keep your home cool.

 3. Wind Turbines

These are a moving vent that is much more environmentally friendly, as it’s powered by the wind. You’ve most likely seen these vents before, as they look much like a chef’s hat. The fan in the vent is powered by the wind, which works to draw warm air out of your attic.

It’s a great option if you’re looking to go down the eco-friendly route, as it uses no power. It’s more effective than a box vent as it’s not static, so it works hard to get the warm air out of your attic. However, you do need to ensure you buy the right turbine for your roof. Cheaper turbines aren’t constructed to last for a long time, and will often squeak when they turn. You’ll also need to get enough wind where you live to make them feasible. If you don’t get a lot of wind, you’ll need to find another option.

 4. Ridge Vents

These vents, when combined with soffit vents, are considered to be some of the best roof vents on the market right now. As the name implies, the ridge vents sits of the ridge of your roof. For the best results, you need to have ridge vents placed along the entire ridge of your home. This creates a uniform look and allows the vents to blends in better with the roof line.

These vents are static, so they don’t have any moving parts. Despite that, they’re an excellent option as they don’t create hot and cold spots throughout your attic. As they run the entire length of the roof, they create much more even cooling.

 5. Soffit Vents

These are vents you’ll use in conjunction with ridge vents. As the name implies, these vents sit in your soffits and eaves at the bottom of the roof, and act as a method of air intake. They’re often made of PVS or aluminum.

They’re so effective with ridge vents as they’re designed to bring in outside air. That air travels up to the ridge vent, where it travels out again. Having that air flow means your attic stays a consistent temperature, and allows you to keep it free of moisture.

 6. Cupola Vents

These vents are seen as mostly decorative, but can have a function in venting your attic too. They sit high on the roof and can function to allow air to escape the attic. Due to the decorative design though, they’re seen as mostly a support to other ventilation systems in the roof.

There’s lots of different roof ventilation options you can use on your roof, and the one you choose will be unique to you. Pick the style that works best with your home, and ensure that your attic isn’t holding onto hot air. Your roof will last much longer with the right venting.


Roof Repair

How To Tell If There’s Problems With Your Roof Drainage System

There are many problems that can affect your roof, but issues with the roof drainage system are rarely thought of.

The drainage system on your roof is incredibly important. When it’s not working, it will lead to all sorts of problems, some that are quite costly to fix. How can you tell if there are problems with your drainage? Here’s how to find out and keep your roof in top condition.

Why Is Your Roof Drainage System So Important?

In short, water is the worst enemy of your roof. In ideal circumstances, the water will roll down your roof, into the gutters, which will then guide it all away. If water is allowed to pool or sit on the roof, then it’s going to get into the structure and cause problems. The most visible issues are leaks in your home. That may include staining on the ceilings, and of course water damage wherever the leak is occurring.

The wood in your roof will become damaged too, if left exposed to water. When you inspect your roof from the attic, you may see mold or rot on the wood. If left long enough, this will seriously damage the structure of the roof, and possibly even necessitate a new roof entirely.

So you can see, it’s vital that you keep your roof’s drainage system in good working order. Here’s what you need to be looking for when you inspect it.

Leaves In The Gutters

The most common problem is leaves and other debris getting into the gutters. Over the fall and winter, trees are going to lose their leaves and they’ll make their way onto your roof, and into your gutters. When too many of them pile up, you’ll see that they stop water flowing through them. As there’s a blockage, that means that water is going to overflow back onto the roof. The standing water will then cause all kinds of issues for your roof.

This is a problem that you can solve quite easily. If you think the gutters are blocked, get onto a ladder and take a look. If you find leaves, simply scoop them out and dispose of them. You can then install a gutter guard that will stop leaves getting back in.

If you want to take it one step further, take a look at the trees near your house. If they’re too close and posing a risk to the roof, you can either trim the branches back or have the tree removed. This will stop the debris finding its way onto your roof.

Improper Installation

You may find that your roof is showing wear and tear after only a year or two. If it’s been recently installed and you’re finding issues such as curling shingles or worn away granules, that’s a sign that the roof may not have had its drainage system installed properly. You’ll need to call on a roofer to come and take a look for you, to see how the issue can be fixed.

Flat Roofs And Ponding

If you have a flat roof, you need to be very cautious about drainage. Now, all flat roofs should have a slight slope and outlets to allow water to drain away when it rains. They’ll also have heavy duty waterproof membranes, to stop water from getting into the roof and causing problems. This should stop most water related issues, but not all of them.

After a heavy rainfall, you may find that some water is sitting on your roof. This is called ‘ponding’. If the water is only there for a day or two, that shouldn’t be a problem, as the water will eventually drain away. If the water stays for longer, then you need to investigate what is causing the problem. Most often, you’ll see that something is blocking the outlets. It could be debris such as leaves, or even balls or other items that have found their way onto the roof. These blockages will need to be removed in order to let the water drain.

Downspout Issues

Even if your gutters are clear and working as they should, you may be having problems with the downspout. If they pump out water too close to the house, the water will get into the foundations and cause issues there. You may notice there’s water stains in your basement, or water starting to stand in grass near the foundations. You know foundation problems are expensive to fix, so you want to avoid that at all costs.

The good news is that the issue is fairly simple to fix. If the water is being pumped out too close to the foundations, you’ll need to install gutter extensions. These will guide the water further away from the house, so you won’t have to worry about any damage to your home. It’s a fairly simple fix that will save you so much money in the long run.

Mildew In The Attic

Mildew can easily start forming in the attic thanks to improper drainage and ventilation in your roof. You may be getting warm air rising from your bathroom, or from your basement. The first step is to find out where the air is coming from. If it’s in your bathroom for example, you’ll need to install a ventilation fan to draw the warm air out of the roof.

Ice Dams

Ice dams are a problem that start in the winter, when temperatures start to freeze. If your attic isn’t properly insulated, then you’ll find that snow on your roof melts, gets to the gutters, and re freezes as it reaches a colder part of the roof. The clogs the gutters and creates a dam, which is going to create more problems down the road. If you get your attic insulated before the winter comes, you shouldn’t have to worry about ice dams.


There are several things that indicate you have problems with your roof drainage system. The good news is they’re often easily addressed. If you’re having any of the above issues, address it as soon as you can to ensure that your roof stays in good condition. Staying on top of smaller issues will stop more expensive ones cropping up later.