Your California roofing warranty is essential when looking to upgrade your roof, but they can difficult to understand. This guide explores 5 things that you should know about your warranty.
When you get a brand new roof installed, you’ll know that there will be a warranty in place that covers you in case of defects or errors.
However, they typically are a little more complicated than that, and you need to know exactly what you’re covered for. Here’s everything you need to know about a typical roofing warranty in California.
Different Warranty Types
The most important thing you need to know is that there are different types of warranties available to you as a homeowner.
1. Manufacturer’s Warranty
The first is the manufacturer’s warranty, the one you may be more familiar with. This covers you for any defects in the materials used to replace your roof. These warranties will last anywhere from 20 to 50 years, depending on the manufacturer and the type of roofing you are using.
2. Roofer’s Warranty
The second is the roofer’s warranty. This will vary, depending on the roofer that you choose to undertake the work. Most typically, this will cover you for the workmanship on the roof, in the case that poor installation has caused problems with your new roof.
How To Register For A California Roofing Warranty
When you have your home re-roofed, you’ll need to check whether the materials used are automatically under warranty. The easiest way to find out is to check the manufacturer’s website. Some will be covered as soon as they’re used on your roof, while others will need to sign up for the warranty online.
Usually, this shouldn’t cost you anything, so make sure you do this when your new roof is being installed.
As for a roofer’s warranty, you’ll need to talk to the roofing company you’re using about it. Some will offer warranties, but you’ll find you may need to pay extra for them. Whether you do so or not is very much up to you, but they are well worth considering if one is available to you.
What Does Your Roofing Warranty Cover?
As there are the two different types of warranties, you’ll need to know what coverage comes with each.
1. Manufacturer’s Warranty Coverage
With your manufacturer’s warranty, you are covered for any defects that are found in the materials used to create your roof. If these defects lead to issues in your roof, such as leaks, then the manufacturer will need to make replacements and repairs for you.
2. Roofer’s Warranty Coverage
Your roofer’s warranty, on the other hand, will cover any issues in the installation on the roof. For example, if a section of flashing wasn’t installed correctly and now is letting water in, you’ll be covered to have it repaired and replaced as needed.
In both cases, you’ll need to read the small print to check exactly what you’re covered for. You want to be aware of what you’re on the hook for, in case anything goes wrong.
What To Know Before You Have Your New Roof Installed
As almost every manufacturer will give you a warranty on their goods, you’ll feel safe knowing that if there is a defect, you’re covered for it. This is good to know and you will get help if this is the case. However, it’s less likely for a manufacturer defect to be the cause of a problem with your roof.
You’re more likely to see problems because there was an error in the way your roof was installed. This is where your roofer with their warranty steps in. If they did have an issue when installing the roof, they will need to make it right.
Again, though, it’s very important that you read the small print on the warranty before you sign anything, so you know exactly what it will and will not cover.
Rule #1: Read the Fine Print
You also need to know that in some cases, the warranty will cover the replacement of the materials used in creating your roof, but not the labor.
Even if there has been an issue with the materials used, you may find that you’ll have to play to have the new materials installed.
Be aware that all warranties are issued with the assumption that you’ll take good care of your roof. If there’s no evidence of you attempting to take good care of the roof, then the warranty may well be void. Ensure you’re looking after your roof once it has been installed.
How to Maintain Your Roof
In California, your roofing warranty is reliant on you taking good care of your roof, you’ll need to know how to properly maintain your roof once it has been installed. Here are some tips to help you properly inspect and troubleshoot your roof.
1. Clean Out the Gutters
Water is the number one enemy of your roof, and your gutters are designed to take that water away. When they’re clogged up, they can’t drain properly, and so water gets back up onto your roof. It will then get into your roof, causing:
- Wood rot if left long enough
This is very easy to avoid, though. Regularly, get on a ladder and take a look in your gutters. If there are leaves and other debris in there, pull it out and clear them.
You can make this easier by installing gutter guards, which catch debris and stop it getting into the gutter in the first place.
2. Look for Missing or Broken Shingles
If there’s a missing shingle on your roof, that’s a spot where water can get in and wreak havoc. This is a simple issue to fix if you’re on top of things, though. If you see a missing or broken shingle when you’re inspecting the roof, you can replace it.
It’s a good idea to keep an extra box of your shingles when you have the roof installed. That way, you know you have matching shingles at hand, should you need them.
3. Look in the Attic
Another way to tell if there’s a gap in your roof is to look in your attic. If there’s light coming through the roof, then that’s a hole that needs to be addressed.
Replace the shingle, or call in the experts to help.
Your California roofing warranty is a great thing to have, as long as you know exactly what it covers. Know the difference between the manufacturer and roofer warranty, read the small print and take good care of your roof.
If you do need the help of the manufacturer or the roofers, you’ll be ready for it.