It can be easy to take the roof over your head for granted. After all, we live in our homes and work in our offices day after day. Most of the time, there is no reason to think twice about the structure that protects us from rain, sun, wind and more. At least, that is the case until something in that structure fails.
There are many reasons why a roof may start to fail. Maybe shingles have blown off or started to curl. Perhaps termites have infested the wood underneath. No matter what the case may be, roofing problems cannot be left unattended. If they are, the problem will invariably start to get worse, causing more damage and leading to more significant repairs.
Instead, once a problem has been identified, it is important to address it promptly. In many cases, any type of issue with the roof will lead to the same complications. Once water and moisture can get past the protective exterior layers of a roof, the support structure underneath is at risk. This can lead to cosmetic damage, but, more alarmingly, it can also compromise the entire structure with wood damage.
Most of the time, wood damage on a roof is caused by moisture. Even if wood is treated for exposure, too much moisture will eventually cause it to soften, warp and rot. When this occurs, the damaged boards become weak. They may even start to disintegrate. If this damage is too widespread, the entire structure may become unsound and require attention.
Fortunately, wood damage repair is an excellent solution that can stop the problem from spreading and restore the integrity of your roof. The first step is to successfully identify the wood that needs to be repaired. Once you know where the damage is, you need to remove the shingles from that board. Even if the damage is fairly localized, you will want to remove the entire board that is affected. Check for damage in surrounding boards as well in order to fully contain the problem.
Once the board is removed, you will need to replace it. Be sure to replace it with wood of the same type and size. To measure correctly, be sure to use the space that needs to be filled instead of the damaged board. Once a replacement is properly cut, it needs to be placed. When setting the replacement, be sure to use decking screws on all edges of the board. The wood should then be covered with felt, and new shingles can be attached.
This type of wood damage repair is possible for an ambitious homeowner, but many people prefer to hire an expert to make sure the job is done right. It is also advisable to have your roof inspected on a somewhat regular basis. In many cases, wood damage can be prevented by properly maintaining the rest of your roof. Always be sure that your shingles are secure and that there are no weak spots in your overall roof coverage. By making sure that water is running off your roof correctly, you can reduce your risk of damage to the underlying structure and protect your home.
If you suspect a problem, do not delay. When wood damage repair is handled quickly, the overall prognosis for your roof is good.
If you are reading this on any other blog than All Climate Roofing
or via my RSS Feed, it is stolen content without credit.
You can find us on Twitter via @ClimateRoofing
Come and visit our blog at https://allclimateroofing.com/blog/